CB550 Cafe build completed - with new pictures

Dude awesome bike I am actually building a 550f SS with a 500t tank. I dig that tank. Was there any specific way you mounted the coils? Or had to change the way the tank mounted?
 
hmenzies said:
Very nice. What exhaust is that?

The exhaust is basically homemade out of different parts, two of the headers are stock (albeit shortened) CB550, two of them are CB600 items, the collector is also a CB650 4 into 2 and the silencers are universal tulip exhausts.
 
SeaWolf85 said:
Dude awesome bike I am actually building a 550f SS with a 500t tank. I dig that tank. Was there any specific way you mounted the coils? Or had to change the way the tank mounted?

The coils were mounted in there normal place with no issues at all. I had to cut down the posts on the frame where the rubber pucks sit by about 1/4" either side and also cut the pucks the same. The main problem I found was that the petcock sits further back on the CB500T tank so when it was sitting in the 'normal' position it hit the far left carb. I thought I would have to move the petcock hole, but what I found was that if I raised the rear of the tank about 1" and rotated the petcock clockwise slightly the petcock then missed the carb completely.
 
Looks great! I picked up the exact same LED mounts for my dash and mounted them to the bar clamps on the triple as well!

What size resistors did you use on those?

Devon
 
Very nice bike! Love the modest headlamp, and tidy overall look.

I am sorry for the countries that require such a huge number plate, though...
 
Back
Top Bottom