CB550 Engine

[phrige]

I have a CB550 i believe its a 76, with 13k miles. No pistons or anythng, The head has few bent valves and is off of my current bike.

The story goes, previous owner threw in this engine which he bought to rebuild the one in my current '75 cb550, he swapped the heads because the valves were bent. Im not sure if he used the pistons or anything else from this '76 engine block.

So if you have a need for this and want to do a swap for something im open to all suggestions. Like i mentioned i have a 75' CB550K. So new parts, cafe parts, Helmet, Jacket its all a worthwhile trade to me.
(i rather trade it then have it sit in the garage.)

Comes with all bolts too.


Pete

 

[bradj]

I have been looking for a 550 motor to put in my 500 to fix the shitty transmission that honda put about ten min of design time in to where are you located what parts do you need

 

[johnnynogood]

is this still available? Where are you located? Any photos?

thanks

 

[phrige]

Sorry I havn't looked at this thread In a long time. I sold the thing a few months back. Sorry guys.