cb900f my first bike

AutumnOrangeGT

New Member
Rode it home last month... First time on a bike in over 5 years, first time on a main road... aaaand a 1.5hr ride back in the rain doh!!
8794780211_29b9c1b88e_z.jpg


Cleaned it up a little bit the next day. The paint is horrible, it looks like latex paint up close done by a brush..
487322_10100479534501196_2010581076_n.jpg


My buddy noticed how it misses at above 6k RPM and said i should really take the carbs off and clean them. They were already pretty clean. Any idea's what else it might have been?
942234_10100479534566066_2000890827_n.jpg

282973_10100479534615966_1756660027_n.jpg


Well.. I guess the tank is already off mine as well fix that paint too..
IMG_20130606_191516.jpg


and while we're at it lets cut that fender down a little bit.
IMG_20130612_150448.jpg

IMG_20130612_150516.jpg


Home made paint booth..
IMG_20130609_145349.JPG


Primer!!
1015200_10100492722517306_1849805114_o.jpg

Doh...
IMG_20130613_183514.jpg


I got new handlebars and grips in the mail today but the grips I also got don't seem to fit..
 
My buddy noticed how it misses at above 6k RPM and said i should really take the carbs off and clean them. They were already pretty clean. Any idea's what else it might have been?

It's worth completely stripping the carbs and giving them a good going over, plus it'll give you a chance to see if they've been jetted correctly for the exhaust, and remember to balance them when you put them back on the bike.

While your at it check it air cleaner - is it nice and clean? If the bike isn't running any air cleaner, or if it's got individual filter pods, then that's your problem (couldn't tell from the pics what it got).

Also check your battery, if it's not holding over 12 volts, then this can also be a source of a mystery miss-fire.
 
kiwi60 said:
Also check your battery, if it's not holding over 12 volts, then this can also be a source of a mystery miss-fire.

Ahh good idea! I picked up a battery tender the other day but I haven't checked the output. Still has the stock airbox, but it didn't have the full vaccum hose off the end of it. Also noticed how tricky the seals on that box were to put back after cleaning the carbs. Its quite possible one of those rubber boots was partially off between the airbox and a carb.
 
Update post on the paint...
IMG_20130624_071522.JPG


I've got it running again and haven't quite tracked down the miss yet.

I did notice today the front-right caliper pulsates back/forth left and right and rubs on the disc The left side rotor is true and doesn't pulse at all.
There doesn't seem to be any vibrations when braking but I suspect it's a warped disc, is this common?
 
Back
Top Bottom