CJ360 Two into One Stock Exhaust System

Sonreir

Oregon
DTT SUPPORTER
Hey all,

I'm selling my stock exhaust system from the CJ360 and it is a two into one system. The pipes are slightly larger in diameter than the other 360 pipes and if my memory serves correctly, these are a slight performance increase over the CB or CL pipes.

Here's how they look when they're on the bike (this is the same system I'm selling, not just a stock photo):
30245_423498650158_5500277_n.jpg


I don't have any pics of these exact pipes yet, but I'll have some up before the end of the week. The sale includes the exhaust spacers/retainers (unique to the CJ360) but not the flanges (same across all the 360s). System is in pretty decent shape, but not perfect. There is some scratching and denting on the collector and a little pitting in a few places and the clamp where the collector meets the muffler is gone (this part probably won't be necessary... I'm pretty sure the muffler and collector are fused together at this point... If you still want/need it, these can be found on ebay for about $10)

I'm asking $100 + $40 for shipping within the US. I will be willing to take a set of CL headers in exchange for the entire system, but shipping still needs to be covered by the buyer.

Thanks,
Matt
 
Yes.

It should fit on any Honda 360. The only tricky parts may be the brake pedal and mounting for the muffler. I can include a CJ brake pedal (also in pretty good condition) as part of the sale and I'm about 50% sure I have the mounting hardware laying out here as well. If I don't have it, it shouldn't be too difficult to fab something up, though.
 
Back
Top Bottom