CL350 .50 Overbore with stock carbs/plugs?

nograv1

New Member
Got some .50 over pistons in my engine and I will soon be at the point of starting her up and tuning. I'm wondering if the .50 overbore will require re-jetting of the stock carbs?

Also while we're at it... I tossed the old nasty spark plugs that came with the bike. What plugs/sizes do you guys recommend?

And lastly, any final tips for starting an engine after a rebuild? Never done this before and don't want to blow her up starting it for the first time! Dump some 10w40 in there and crank it over I guess? Haha
 
raptormeat said:
make sure the oil baths have oil in them before you seal up the head..easy to forget

Already sealed back up and installed in the frame and I didn't do that.... Is this a major problem?
 
Back
Top Bottom