Cl360 scrambler headers / exhaust- Fits cb360

[sbaugz]

A pair of very nice, very hard to find scrambler headers off a 1975 cl360 honda. Fits cb360 as well. Includes headers, mounting flanges and bracket that holds headers which attaches under swingarm bolt. No holes or rust through but there is some minor surface rust in a few spots. these would,clean up very well. Last picture shows mufflers and heat shields which are not included.
Asking $100 plus shipping
These are super hard to find.

 

[mattfeet]

What's the best way to attach aftermarket mufflers to the pipes now? IIRC, one of the OEM mufflers is welded on, correct? So I assume these headers were cut down just prior to the OEM muffler?

(I have a CL360 exhaust sitting in my garage with a hole in the top muffler so Im just looking for options)

Thanks,
Matt

 

[sbaugz]

What's the best way to attach aftermarket mufflers to the pipes now? IIRC, one of the OEM mufflers is welded on, correct? So I assume these headers were cut down just prior to the OEM muffler?

(I have a CL360 exhaust sitting in my garage with a hole in the top muffler so Im just looking for options)

Thanks,
Matt

Yes, headers were cut down.
There are probably numerous posts here on various aftermarket mufflers and how they attach. I know dime city has a bunch to choose from. Basically you need to find mufflers with the same inner diameter as the outer diameter of these headers and clamp them on. Some people don't run mufflers and simply use straight headers.

 

[Rusnak_322]

I used cheap emgo mufflers and they were a tight fit on the headers. I drilled a hole and used a self tapping bolt on the back side to hold them on.
You could also use several rivets.

see my build tread in my sig.

 

[sbaugz]

Thanks rusnak
Very cool bike

 

[sbaugz]

Sold

 

[mattfeet]

Crap! I have to return mine via ebay and was going to buy these!