CL450 cam and cam follower wear

DHolbrook

Active Member
Looking at the pics, follower 1 and 2 still have a nice dome shape, but 3 and 4 are a bit flatter and have a dip through the middle. 3 and 4 seem shot to me, do 1 and 2 look ok? All of them have slight pitting marks on their edges it seems.

On my cam the lobes look great except for one glaring issue. Is this wear normal? Is this rocker usable as-is?

Thanks!
 

Attachments

  • P1010010 (2).JPG
    P1010010 (2).JPG
    340.4 KB · Views: 521
  • P1010019 (2).JPG
    P1010019 (2).JPG
    255.4 KB · Views: 537
Cam looks OK, but I'd only look at using rocker #1 and only then if you were broke and couldn't afford to buy four new (to you) ones.
Best to get a replacement for those four or at least have them resurfaced.
 
Ok I'll keep that in mind. It sure is easy (and fun) to spend money on these bikes! I thought I could reuse cam and followers and spring for a better top end oiling system..but we'll see...

If i'm going to resurface the followers, what are the specs for them? My manual only mentions the journal dia. and to replace with signs of wear. Would my machinist know what to do, or are there specs I need to provide?
 
They need to have teh hard chrome stripped off and welded up with Stellite and reground to the correct shape. megacycle do that IIRC - ain't nothing cheap about cheap old bikes though (if you'll pardon the English).
 
Back
Top Bottom