I recently (yesterday more specifically) started having clutch problems with my scrambler. The clutch, when squeezed fully, will click and not release as usual. It can be pushed back into position. I can shift into gear finding the friction zone, but only if I depress slightly. Was able to ride to shop and have them look at it. They took apart the crankcase and determined that the clutch lever (part number 22815-286-010) the clutch adj. cam ( 22841-286-000) and clutch ball retainer (22860-286-000) are shot. Anybody have experience with this issue? Anyone know where I can find the parts? The dealer said they don't have access to those particular parts and was told "part of the fun of a 40 yr old bike is the scavenger hunt for old parts".
Clutch issues with `75 Honda CL360
- Thread starter Rot1014
- Start date
TheCoffeeGuy
Books, Books, Books, knowledge is within
Sounds like something like i experienced, turned out to be a cable issue.
TheCoffeeGuy said:
Any chance this could be the effect of a handlebar switch. I changed my stock bars to club mans (royal pain in the ass) and this is when I noticed the prob. Didn't seem like it was the symptoms what people normally experienced when they switched to lower bars, but I am very new to the mechanical world.
mydlyfkryzis
当有疑问时踢你的敌人在生殖器上，你可以道歉后
More likely you are just out of adjustment.
go here: http://www.hondatwins.net/forums/48-engine-discussion/8701-350-360-clutch-adjustment-proceedure.html
Follow the procedure to the letter and I bet your problem is resolved.
go here: http://www.hondatwins.net/forums/48-engine-discussion/8701-350-360-clutch-adjustment-proceedure.html
Follow the procedure to the letter and I bet your problem is resolved.