Converting stock signals and break light to led

ibudd

New Member
I bought a 1980 honda cb 650c, slowly converting it to a bobber. First build,I've ordered a led taillight and led signals, do I have to change anything or is it just the matter of re wire?
 
You will need an LED / no load flasher relay unit as the stock ones rely on the extra draw of the incandescent bulbs to make them work.


Other than that, it's just wiring.
 
If you are still having troubles with your LED lights. Check out this article. It might help you. http://hondacaferacers.com/2015/06/16/aftermarket-led-turn-signals-installation-troubleshooting/
 
Back
Top Bottom