Staffy
It's not yours 'til you cut it up.
Re: CX500 "Bastardwing" - 27 Dec - First coat of paint on - video up
Well the recoat is supposed to be after 16 hours, but thinning it down wil apparently reduce that time. That said, I didn't thin it enough and the paint has gone on too thick so almost a day later (4 hours of which has been outside on the pavers in the 30 degree sun) and I can still leave a thumb print in the paint. I had thinned it about 20% but I'm gonna go closer to 50% next time, which is what is recommended for this method. The gloss does look good, but there are scratches and scuff marks from the first lot of sanding. I'm sure it'll come back good with some 800 grit though.
Well the recoat is supposed to be after 16 hours, but thinning it down wil apparently reduce that time. That said, I didn't thin it enough and the paint has gone on too thick so almost a day later (4 hours of which has been outside on the pavers in the 30 degree sun) and I can still leave a thumb print in the paint. I had thinned it about 20% but I'm gonna go closer to 50% next time, which is what is recommended for this method. The gloss does look good, but there are scratches and scuff marks from the first lot of sanding. I'm sure it'll come back good with some 800 grit though.