DEET MB5 - Fully Legal

Re: DEET MB5 - Tail Lights

Thanks guys.

John, I'm going to run it with the oil pump for now so I'll pass on the plate. The lights that are in the seat now are just marker lights, and I'm just using them for the lens. I removed the guts of them last night and will be mounting a LED taillight behind them
 
Re: DEET MB5 - Tail Lights

Started in on making the headlight ears the other day. Very slow going since I only get a half-hour every now and then to work on it. I first took a picture of the forks and me holding the headlight shell so I could bring it into Photoshop and figure out what shape to go with. Decided to sort of replicate the shape from the oil tank.

Printed out the shape and glued it to some sheet metal to make it easy to cut out.

headlightEars_1.jpg


Trimmed the metal down and removed the paper.

headlightEars_2.jpg


I'm using mountain bike seat post clamps to hold the ears on the forks. Finished drilling the holes for one side tonight. This is where it stands now. I'll most likely trim some metal out of the middle to make them visually lighter.

headlightEars_3.jpg
 
Last edited:
Re: DEET MB5 - Tail Lights

So jealous of the resourcefulness of this build. I bet we could throw you in a metal dumpster and you'd drive a Ferrari out of it... This little guy is gonna be great in the end, can't wait!
 
Re: DEET MB5 - Tail Lights

Thanks! The only Ferrari I'd come out with would be some child's toy :) I'll have to start using that term 'resourceful', I keep thinking I'm just cheap, but resourceful sounds much better :)
 
Re: DEET MB5 - Tire Woes

Just heard back from my dealer that the front tire I've been waiting on for four months is still on back-order. Not the dealer's fault but very frustrating. I'm beginning to worry that I won't be able to find one. I've checked some of the online tire shops and they are listing the 2.75 X 18 Gazelle M62 as being out of stock. I really don't want to mix and match the front and rear tires, rather have both the same but thinking I may have to if I can't find one. I have an old knobbie that was on the bike when I bought it, I may stick that on for now until I can find one.

I just fired off an email to the Michelin company to see if they know what's up.
 
Re: DEET MB5 - Tire Woes

Well I got a response from Michelin about the tire today. Impressed with the prompt reply. They say that "We apologize the Gazelle 2 in size 2.75-18 is not available for retailers to order. The tires are in transit to one of Michelin Distribution Centers. The estimated time of arrival is July 30."

Not the answer I was hoping for but happy that at least I now know where I stand with it and when I can expect to get one. Beats having to constantly be checking. At the rate I'm going lately I probably won't be ready until August anyway :)
 
Re: DEET MB5 - Tire Woes

the rate I'm going lately I probably won't be ready until August anyway


this a very common scenario 8) ;D :P :-[
 
Re: DEET MB5 - Tire Woes

I'm always amazed at how the brain works. I was thinking about what kind of paint scheme to do with the bike yesterday. Spent a bit of time looking at different colour combinations and how to do them on the bike. The MB5 is not a traditional looking bike so I struggled a bit with coming up with a decent looking design. Went to bed having decided on the colours I'm going with, but couldn't get my head around how to do them. Fast forward to today, I took my daughter to dancing class and was sitting in the waiting area, listening to music and reading a book. Suddenly the whole scheme just popped into my head. :o I wasn't consciously thinking about it, but obviously was somewhere in the back of my mind.

This happens to me quite frequently. I'm a computer programmer and often struggle at work with trying to figure out how to do something, and very often the answer pops into my head the next morning in the shower and it seems so obvious then. Just need to step away from things sometimes to see it better.

I think it will definitely work, just need to do it up in Photoshop to confirm and work out the details. Will post a pic when I get it done.
 
Re: DEET MB5 - Tire Woes

Definitely want to see what your brain is putting together. With a black frame the possibilities are endless. :)
 
Re: DEET MB5 - All Ears

Got a chance this morning to finish shaping the headlight ears. I'm happy with the way they came out. Just have to clean them up a bit and get them, and the headlight bucket, ready for paint.

headlightEars_4.jpg
 
Last edited:
Re: DEET MB5 - All Ears

Nice work. I used to program as well and always when stuck would go do something else and the code would just pop in at the least expected moment, then I would have to run to the computer and try it. looking forward to the PS of the color.

Cheers,

Maritime
 
Re: DEET MB5 - 5 Minute Paint Job

Finished mounting the headlight and taillight this morning so will soon be ready to paint these few bits as well as the tank and seat. I have to test my paint scheme out before commiting to it so I gave the tank and tail a single coat of black. I'll now do a few tests to see if I like the scheme. Once I'm happy with it I'll tear it down for paint.

Shot of the taillight and license plate lights. Don't have a plate yet so used a piece of cardboard instead.

tailLight_1.jpg


tailLight_2.jpg


Quick black paint-job.

Before:

prePaint_1.jpg


After:

prePaint_2.jpg
 
Last edited:
Re: DEET MB5 - 5 Minute Paint Job

Erskine said:
It just keeps getting sweeter. Hurry up!!

Wish I could, I've been moving at a snail's pace lately, don't get much time.

Rocan said:
the mb5 has such nice lines...

Yeah, they are a unique shape but I've always loved the lines of them.


Just did a very quick and rough Photoshop of what I'm thinking. May need to add either a thin black or white highlight to the middle stripe.

prePaint_4.jpg


prePaint_5.jpg
 
Last edited:
Back
Top Bottom