Do you like it or hate it. Help a brother out!

theracedude

New Member
I never show my bikes till they are done because i don't want others to change my direction but i am almost finished with my 72 CB750 and i hit a wall. I am asking for your thoughts on the tail/brake light. Do you like it or hate it? Thanks, Randy
 

Attachments

  • CIMG4189.JPG
    CIMG4189.JPG
    130 KB · Views: 321
  • CIMG4190.JPG
    CIMG4190.JPG
    127 KB · Views: 304
  • CIMG4191.JPG
    CIMG4191.JPG
    124.4 KB · Views: 304
I dont hate it, but I dont love it either... That tail section is really sleek and clean, and than BAM! that light just pops out. Something recessed, or even a sidemount plate/light combo would look nicer in my opinion. The rest of the scoot is looking great though!
 
If there is any way to french the light in, that would look great. Barring that, I've gotta go with the side mount. That rear is really too nice to have that light sticking up.
 
VonYinzer said:
I dont hate it, but I dont love it either... That tail section is really sleek and clean, and than BAM! that light just pops out. Something recessed, or even a sidemount plate/light combo would look nicer in my opinion. The rest of the scoot is looking great though!
Thats right! You see it too. When i built the bike i didnt have the tank painted or the seat finished. The light at that time had a "British" look to me and i liked it in a strange way. Now i am afraid i got used to it and except it kind of like an ugly puppy that you fall for the second time you hold it...
 
I will second what others have said, it breaks up the "flow" of the tail section, and thus the rest of the bike as well. So difficult to do a clean tail light on a minimal cafe tail. Can you turn it 90 degrees and run it and the license plate vertically off of the upper shock mount?
 
You are exactly right that it has that British look of the time. Back in the day, we didn't do things like frenching in lights and LEDs were not invented.

The good news is that it raises the license plate which would be too low if it were mounted below the seat. I personally do not like side mount plates, but it might work on this build.

Or get 1" longer shocks and use an LED strip at the lower edge of the seat hump. That might be the cleanest
 
I like it exactly the way it is. I think with out it your tail section is going to resemble a door stop. And ya, it gives a very period or dated look. Which I think is nice.

And I hate me some LED's...
 
teazer said:
You are exactly right that it has that British look of the time. Back in the day, we didn't do things like frenching in lights and LEDs were not invented.

The good news is that it raises the license plate which would be too low if it were mounted below the seat. I personally do not like side mount plates, but it might work on this build.

Or get 1" longer shocks and use an LED strip at the lower edge of the seat hump. That might be the cleanest
I am not a fan of LED's because they are too new looking for me... but i may need to do it
 
at first glanced hated it, then it grew on me...this may sound stupid but could you tilt/angle it back some to match the lines of the tail section or would you lost too much visibilty of the light?
 
Regarding the tail light I'd like to use one of my favorite words in the english language, BOLLOCKS! Frenched tail lights back then were unheard of. Photo of my Norton taken in 1973. No frenched tail light. Leave the tail light right where it is. Nothing wrong with it.

picture012kg.jpg
[/img]
 
Hoofhearted said:
Regarding the tail light I'd like to use one of my favorite words in the english language, BOLLOCKS! Frenched tail lights back then were unheard of. Photo of my Norton taken in 1973. No frenched tail light. Leave the tail light right where it is. Nothing wrong with it.
I have a hard time with anything that is not period correct also.
picture012kg.jpg
[/img]
 
Hoofhearted said:
Regarding the tail light I'd like to use one of my favorite words in the english language, BOLLOCKS! Frenched tail lights back then were unheard of. Photo of my Norton taken in 1973. No frenched tail light. Leave the tail light right where it is. Nothing wrong with it.
picture012kg.jpg
[/img]

Well, it's not exactly a period correct Norton, either. I say do what you like, but I still think it would look better if it wasn't sticking up back there.
 
"Back then" is no more my friend... Hahaha. Honestly though, whatever ya do, itll look great. Just make sure you like looking at it and you cant go wrong.
 
I'm gong to run into the asme problem soon also. I'm not sure which way to go but I agree with Black Coyotey. Move it closer to the seat.
 
Fix said:
Well, it's not exactly a period correct Norton, either. I say do what you like, but I still think it would look better if it wasn't sticking up back there.

What period would it be correct for? I built it between 1971 and 72. Rode it and raced it until I broke the engine in '76. And then stuck a '49 500T Norton engine in it.
 
Fix said:
Well, it's not exactly a period correct Norton, either. I say do what you like, but I still think it would look better if it wasn't sticking up back there.

Well it is a Honda tail light from the mid to late 60s.
 
Thats what was available at the time. The tail light is from a 60s Honda. I couldn't find a late 90s Honda tail light in 1972. I didn't have the luxury of the internet to find the latest gold plated LED lights and a Sammy Sackswinger cafe racing seat in carbon fiber with tail light recess and matching T shirt. We did with what we had. Back then it was a simple fact of life. Throw in the fact that a tail light was only there to keep the cops happy. Its shape and position was irrelevant. It was taken off along with the head light when I got to the race track.
 
Hoofhearted said:
What period would it be correct for? I built it between 1971 and 72. Rode it and raced it until I broke the engine in '76. And then stuck a '49 500T Norton engine in it.
I meant the Honda, Hoof. I may not know much, but I know better than to tangle with you over stuff I wasn't around for. :)
 
Back
Top Bottom