Engine backfires and won't start after jet kit, exhaust and pods.

Kbwill

New Member
I have a 1992 honda nighthawk 750 cafe project that's nearing completion. I put in a 'stage 3' jet kit, pod filters and have a straight through exhaust. Now I'm trying to get it running again as it won't start. It backfires through the exhaust and the carbs. Any advice? I feel like it should at least start with everything put back together.

Jets are 125 mains, 40 pilots and two washer shims for the needles.

It flooded last night but I'm not sure how to correct this. It seemed to flood mostly in the #1 cylinder.

Any advice would be greatly appreciated.
 
what size is the stock pilot jet? and Mains? these are CV carbs correct?
I would never do such big changes at once, put back the airbox on and see if you can tune for just the exhaust.
good luck
 
Back
Top Bottom