pacomotorstuff
Coast to Coast
Hi all,
We’re doing our spring cleaning in the store room, have decided to put some of our fairing moulds up for sale and a few of them have already found new homes.
Yamaha TD2/TR2 Production Road Racer Fairing Mould
Exceptionally good shape with great finish. Professionally made, probably from a factory fairing back in the day. We currently use this mould in our shop – and let me stress this – it’s ready to build parts today if you are. The moulds are 3 pieces – main fairing, belly pan and “T-piece”.
We’ve fitted this fairing to CB350’s (it’s used by a number of racers), Suzuki 250 and 350 twins, Yamaha 250’s and 350’s and it will fit other ‘60’s and ‘70’s bikes of the same general size as well. Makes a great full fairing for a café racer.
Yamaha TD3/TR3 Production Road Racer Fairing Mould
This is a professionally manufactured mould, about 10 years old, was made from a brand new replica fairing. Back then, it cost well over a grand.
The surface finish on the mould is exceptionally good – most of our racing customers don’t even paint them. The 3 mould pieces consist of the main fairing body, the belly pan and the “T piece”.
The fairing will fit Yamaha aircooled 250’s and 350’s of the '60's and '70's and other makes and models of similar size - we even built one for a CB360 café bike.
With a modest outlay in materials, you could be making fairings for your ride and your buddies’ bikes tomorrow.
Either the TD2/TR2 or TD3/TR3 fairing mould is $575.00 Canadian apiece, including HST (we have to charge it), which is far less than a mould of equal quality would cost you if you were getting one built today (and had the fairing to build it from).
TZ700 Yamaha Production Road Racer Fairing Mould
We got this mould in really rough shape a number of years ago and rebuilt it. Now, it’s a pretty good piece of equipment and we’ve built a number of fairings from it. We never did anything with the cobby belly pan mould, which is included in the sale and we never got the mould for the T-piece.
Aside from the TZ700 Yamaha, this fairing will fit 650 and 750 twins and some of the aircooled triples and fours. One customer put his fairing on a GT750 Suzuki, but had to do cutouts for the alternator and points covers and a bunch of other changes - but it looked great at the end. The mould is still in use in our shop – you could build a fairing with it tomorrow if you wanted to – but because it isn’t quite as good as our other moulds, we’re asking $400.00 including HST - less than the fairing price on our 2016 parts list.
Payment by e-transfer, paypal, cash, Canada Post money order. No cheques, no credit cards. Sorry, I can't "hold" parts for anyone.
We are located in Georgetown ON (west GTA) but could deliver the moulds a reasonable distance for a fee if you can’t pick up. Wasn’t really looking at shipping anything this big and heavy, but I’ve had a number of inquiries regarding same, so if you’re willing to pay for it, I could check into the cost. We're going to be at the CVMG Flea Market in Paris ON and could bring them along for pick up.
If you want photos, please email us.
Thanks for looking.
Pat Cowan,
Pacomotorstuff,
pacomotorstuff@cogeco.ca
905-873-3171
We’re doing our spring cleaning in the store room, have decided to put some of our fairing moulds up for sale and a few of them have already found new homes.
Yamaha TD2/TR2 Production Road Racer Fairing Mould
Exceptionally good shape with great finish. Professionally made, probably from a factory fairing back in the day. We currently use this mould in our shop – and let me stress this – it’s ready to build parts today if you are. The moulds are 3 pieces – main fairing, belly pan and “T-piece”.
We’ve fitted this fairing to CB350’s (it’s used by a number of racers), Suzuki 250 and 350 twins, Yamaha 250’s and 350’s and it will fit other ‘60’s and ‘70’s bikes of the same general size as well. Makes a great full fairing for a café racer.
Yamaha TD3/TR3 Production Road Racer Fairing Mould
This is a professionally manufactured mould, about 10 years old, was made from a brand new replica fairing. Back then, it cost well over a grand.
The surface finish on the mould is exceptionally good – most of our racing customers don’t even paint them. The 3 mould pieces consist of the main fairing body, the belly pan and the “T piece”.
The fairing will fit Yamaha aircooled 250’s and 350’s of the '60's and '70's and other makes and models of similar size - we even built one for a CB360 café bike.
With a modest outlay in materials, you could be making fairings for your ride and your buddies’ bikes tomorrow.
Either the TD2/TR2 or TD3/TR3 fairing mould is $575.00 Canadian apiece, including HST (we have to charge it), which is far less than a mould of equal quality would cost you if you were getting one built today (and had the fairing to build it from).
TZ700 Yamaha Production Road Racer Fairing Mould
We got this mould in really rough shape a number of years ago and rebuilt it. Now, it’s a pretty good piece of equipment and we’ve built a number of fairings from it. We never did anything with the cobby belly pan mould, which is included in the sale and we never got the mould for the T-piece.
Aside from the TZ700 Yamaha, this fairing will fit 650 and 750 twins and some of the aircooled triples and fours. One customer put his fairing on a GT750 Suzuki, but had to do cutouts for the alternator and points covers and a bunch of other changes - but it looked great at the end. The mould is still in use in our shop – you could build a fairing with it tomorrow if you wanted to – but because it isn’t quite as good as our other moulds, we’re asking $400.00 including HST - less than the fairing price on our 2016 parts list.
Payment by e-transfer, paypal, cash, Canada Post money order. No cheques, no credit cards. Sorry, I can't "hold" parts for anyone.
We are located in Georgetown ON (west GTA) but could deliver the moulds a reasonable distance for a fee if you can’t pick up. Wasn’t really looking at shipping anything this big and heavy, but I’ve had a number of inquiries regarding same, so if you’re willing to pay for it, I could check into the cost. We're going to be at the CVMG Flea Market in Paris ON and could bring them along for pick up.
If you want photos, please email us.
Thanks for looking.
Pat Cowan,
Pacomotorstuff,
pacomotorstuff@cogeco.ca
905-873-3171
