Firestone Deluxe's for *stock* CB350K3

jam3sk

Workin' day and night
I know there have been a number of topics on tires for the CB350 Twins and Fours (I've just read them,) and I also know there are not a lot of choices out there for a 3.00-18 or 90/90-18 front tire... but I REALLY LIKE the look of the Vintage Firestone Deluxe's:

http://www.dimecitycycles.com/vintage-cafe-racer-bobber-brat-chopper-custom-motorcycle-tire-350-18-firestone-deluxe-champion-71308.html

I know people fall on both sides of the line: go big, even if it means new rims, chain mods, etc, or stick with stock size because that's how the bike was designed, and you will see optimal performance. Others think putting anything bigger than a 3.00-18 (90/90-18) on the front or a 3.50-19 (100/90-18) on the back, and you might be risking popping a bead on a 45mph turn, or something.

So here I am... this will be my first bike, the "20 years in storage" story, so I'll obviously be starting off just trying to get the thing running. I'm not looking at mods at the beginning... maybe new bars while I'm replacing all the rubber and cleaning things up, paint job, etc, but that's it if i can help it, for now. I want to keep the fenders/chain/forks/rims stock; I don't want to make other adjustments for bigger tires than will fit naturally. I figure, I'll have my hands full as it is.

So, to my questions: can I put that 350-18 on the front AND back without it looking weird? Can I even put it on the front without consequences? If the back SHOULD BE bigger, can I put the 400-18 on the back without consequence? Are these "close enough" to stock for a guy who will mostly just be cruising around and wants the bike to look cool, but might like to open 'er up from time to time?

Thanks!!! This is my first post... of many, I'm sure.
 
You can put an 18" tire front and rear and not look weird. Just check out my 175 link in my signature.
 
I'm running 18" WM3 (2.15") rear rims on front and back of my XS650 with a 100 (4 inch) front and 110 rear Avon Roadrider. Looks good, handles fine.

A 3.5 inch front tire isn't that wide. 3.5 inches x 25.4mm/inch = 90mm. You can run 100's front and back no prob.

IMG_1763.jpg
 
Fit wider rims.
Stock 350 has a WM1 (1.60") front rim.
I have a couple of WM2 (1.85") 'rears' that I took off to fit WM3 rims onto hubs, (good/reasonable chrome that could be fitted to front hub)
If you've read through a lot of tyre threads you will have seen this link before
http://www.hagon-shocks.co.uk/WheelTab.htm
 
There are two schools of thought (at least). Those who think those black things look cool and those of us that think they are lethal and have no place on a motorcycle. No guesses as to my opinions then. I did do some on line research and my interpretation of what I read was that they are OK if you ride slowly and only in the dry and that in the wet they are like riding on wet ice and going fast they handle kind of funky.

Your interpretation of what you read my not be the same, but to me, first bike - screw looking cool, stay safe and learn how to ride first. When you have a couple of thousand miles in different conditions under your wheels, then stop and think about how you want the bike to look and what you actually want to do with it/on it. Cool is overrated.
 
So now I'm convinced on one hand, and confused on the other. I think I'm keeping the wheels stock and going with the Avon Road Runners/Riders that come in smaller sizes and get good marks everywhere I look. Sourcing and fitting bigger and/or wider rims sounds like a "future projects" task... not on my current list that is probably already longer than I realize.

What has me confused now is the link crazypj posted. It seems to contradict this:

http://www.webbikeworld.com/Motorcycle-tires/tire-data.htm

According to my link, I could fit a 90/90-18 on the front WM1 and a 100/90-18 on the back WM2, and be pretty much at the same size as stock. Crazypj's link blows that out of the water, gives me even tougher sizes to find, and even claims the stock 3.00-18 and 3.50-18 are just within the acceptable range, but not ideal for the stock rims. What do you guys think?
 
You are right. Fit Road Riders in those sizes and you will be golden. That chart in interesting but it doesn't really tell you want inch size tires will fit your rims.

AVon say that their 90/90 is too wide for a WM1 1.60 rim, but you should be OK with it. 80/90 would be a more correct fitment but they are harder to find.
 
jam3sk said:
What has me confused now is the link crazypj posted. It seems to contradict this:

http://www.webbikeworld.com/Motorcycle-tires/tire-data.htm

According to my link, I could fit a 90/90-18 on the front WM1 and a 100/90-18 on the back WM2, and be pretty much at the same size as stock. Crazypj's link blows that out of the water, gives me even tougher sizes to find, and even claims the stock 3.00-18 and 3.50-18 are just within the acceptable range, but not ideal for the stock rims. What do you guys think?

Yep, stock tyres are just within range for stock rims.
If you rode one of them in the 70's you would know just how 'strange' the handling was.
You have to remember they were made as budget bikes so costs were cut where possible.
It's also part of the reason the tyre pressures were 'high' compared to correct sized rims/tyres on similar weight bikes

There is no contradiction as the link you posted says nothing about rim widths, only has comparisons of tyre widths.
I looked at a few pages from your link and found this :-

"Update #3: I notice a lot of headshake at certain speeds with this tire. Not sure if it's the tire or something else with the bike, but a couple of times it was actually scary. I took my left hand off the bars once to scratch my shoulder and it really started shaking bad. Gave me a good scare!"

Guy fitted a 110/90 instead of stock size 100/90.
Removed it for a 110/80 as that's what worked for him on BMW.
A 90/90 and 100/90 is realistic fitment on CB360, they do bulge a bit, particularly if you compare same tyres on WM3 rims.
From reading in your link, a 90/80 and 100/80, lower profile may be better?

I don't have to explain but this time feel I should (I've had a couple of beers for first time in months :D)
I think the major issue I have is the fact I worked in a lot of different motorcycle shops and, in Britain, I was a Ministry of Transport motorcycle tester .
Lot of things may not be illegal but experience has shown me they are not safe.
Tyres are one thing you trust your life to, if you had the experience to know you wouldn't be asking.
I do dumb shit but know expected results and don't post them (unless its really funny or did better than expected) ;D
I want to give the best information I can but ultimately it's your choice.
Glad you've decided against the Firestones, AVON is a good tyre
 
I am really beginning to appreciate the wealth of knowledge and experience here... all of the responses so far are invaluable!!! I just called Avon US, and they tell me they have 90/90-18's and 100/90-18's listed in their system as fitting stock CB350 rims. Thanks to you guys, I know that, while this may work, would not come without consequence. I also see a few less expensive tires (cheng shins or IRC, for instance) that do come in smaller sizes and are measured in inches, but I'm wary of taking chances there. Even the same as stock, I now know, is not ideal.

After all the feedback, and lots of research on rims and tires, and the extent of mods needed to fit bigger rims and tires, not to mention the consequence of the extra weight, etc, the "sweet spot" seems to me to be:

- Lose my WM1 front rim, in favor of another 18" WM2 from the motorcycle salvage yard I found that happens to be 20 minutes from my house, if they have one. Plan B is to source one online (like from Buchanan's, or someplace cheaper, if someone wants to make a suggestion. Someone on another forum said MikesXS, but I don't see an 18" WM2. Am I looking for aluminum? Chrome? Does "Alloy, polished" mean aluminum alloy? Any other recommendations on that front?) As I understand it, my current front hub and spokes should work with an 18" WM2.

- Go for the Avon Roadrunner/Rider 90/90-18's on front and back. Still not "recommended" fitment according to the chart, but excellent tires that will not push the fitment threshold.

Does this sound reasonable? If not, what would you do in my situation?
 
I have personal experience of following crazypj, who was riding a cj350 of sorts many years ago, and yes he does know what tyres work on these old hondas!

Suffice to say he's not called crazypj because of his music taste, although I'm sure he's still listening to Billy Idol!

Hi from Wales by the way....
 
Back
Top Bottom