First build CB360, any help will be great!!!!!!!!

So heres some quick pics... Few little things to do, need some sort of rear mirror, haven't decided what yet. Bike runs pretty damn good now with the trumpets on it, but need to keep revs up slightly when coming to a stop or it stalls? Wondering if it could be float levels, idel etc, just need to work it out...
theres some nice little details, like the mount for the rear light, etc few other things I'll photo up close that i didn't during the build, like the tray etc...

P6010848.jpg

P6010850.jpg

P6010852.jpg

P6010853.jpg

P6010855.jpg

P6010856.jpg
 
might adjust air / fuel mix screws ? If pipes kackle as you slow down and rpms dropping...its rich. The reason you have to keep revs up. to keep some air moving through there. But if it hesitates on take off points to lean.
And yes your bike is really good lookin.
 
Yeah a friend said it may just be that needing adjustment, I only have the pull cable left so will look at adjusting that, thanks!!!!
 
trek97 said:
might adjust air / fuel mix screws ? If pipes kackle as you slow down and rpms dropping...its rich. The reason you have to keep revs up. to keep some air moving through there. But if it hesitates on take off points to lean.
And yes your bike is really good lookin.
Click to expand...
I modified this to make it easier to read.
 
Cheers!!!! ^^^^^ Also would have liked a the fender to follow round but it was a found/gifted rolled alloy one, we spared all we could to use...but I'm thinking about what to put there to help save wear and tear...
 
Just a simple bit of sheet metal does the trick. I fabbed this up and installed it in just under two hours.

545044_10150965215605159_504612376_n.jpg
 
You must log in or register to reply here.

DTT Light or Dark

  • DTT Light

    • Spread the Love

    Back
    Top Bottom