For Sale NOS "Weber" Dual Throat Carb

pacomotorstuff

Coast to Coast
FOR SALE NOS "WEBER" 2H-40B-1A DUAL THROAT CARB
New Old Stock (NOS) "WEBER" carb built under licence by Nikki Carburetors in Japan.
Purchased new and stored all these years in the original box with instruction pamphlet. Never had gas in it or even bolted up to a motor. Carb is supposed to use "100%" of the Weber DCOE 40 carb parts (I haven't confirmed this).
Identification on the carb body: "Nikki" , TOKYO JAPAN, Date stamp: 8-5, Type 2H-40B-1A. The only defect I can see is one velocity stack bellmouth is slightly deformed.
Years ago, Brian Littler (from South Africa) made an intake manifold for these carbs to fit CB450's and I've seen pictures of them on other Japanese twins and Harleys. Email me and I'll send you some carb photos (still having posting problems).
At $175.00 CDN, our (big) loss is your gain. Paypal or cash, no cheques, no trades unless you have a Yamaha TD1 rear brake backing plate complete with shoes, springs, lever and cable.
Can arrange shipping at buyer's expense.
Thanks for looking
Pat Cowan,
pacomotorstuff@cogeco.ca
905-873-3171
 
hey pat.. if you want, you can email me a pic and I'll be happy to post it up for ya...
 
oh good lord!!.. those are the most beautiful set of carbs that Ive EVER seen in my life!!..
If I had a cb450 Id grab them..






looks like they belong on a rocket ship
 
Sorry about the last post - the thumb was quicker than the brain...
Don't know if you're funnin' me or not, but what the hell...
Anyway, if you're serious about this, the fabrication effort required to build an intake manifold, plus the patience, time and additional $$$ to tune the carb for your single will be monumental. Except for the total shock effect of the installation, the effort would be far greater than any resulting performance enhancement you got from the carb, IMHO.
If you're not that familiar with them, the Weber / Nikki carbs have been called the "most tunable" carb in the world. You can change everything on them - including the throat size. While they're called 40mm carbs, you can actually get different throat diameters to fit in the carb to tailor the carb to your engine. If the smallest available throat was still too large, you could get custom machined ones I suppose - not cheap. On these carbs you can change the stroke on the accelerator pump and a lot of different little jets and stuff to tailor the fuel curve all over the (fuel) map. It's easy to see why these were the carb to have before fuel injection became popular. Ferrari / Ford / Alfa Romeo, etc etc etc used different versions of the Weber carbs up 'til the 70's and most hot European and Japanese cars had manifold kits available for them back in the day.
I've seen these carbs behind Nortons, Triumphs, XS650's and a brace of the smaller ones behind a CB750 - and of course on HD's. There was a sidecar rig running one about 40 years ago, but for the life of me I can't remember what motor was in it. I looked at putting it on my cafe Virago, but pupped out and went with dual VM38 round slides...
Another thing to keep in mind, when they were road racing the CB450 engine seriously, the powerband started about the time you hit redline on your 500 and bottom end torque was just a wet dream.
Back to Brian Littler; I'll see if I can find the article(s) on his CB450's, scan them and email them to you.
Honestly, I'd keep the damned thing but I've got so many irons in the fire these days it's ridiculous - and I'm not even going to tell you about the supercharger for my kid's 175 twin...LOL
Anyway, outstanding value for the money - be sitting down if you price a new one, though. If my carb doesn't sell, it goes back on the shelf. And the price is the price.
Regards,
Pat
 
Back
Top Bottom