Forks, manifolds, and carburetors

makenzie71

Been Around the Block
35mm Showa Forks. Originally on a 1979 Suzuki GS750E. No leaks and work great. $125 shipped to the Continental US.

30mm stainless manifolds. Setup for 8v Suzuki's (tapped to fit a 1979 GS750E) but can be swapped to others or modified to fit pretty much anything. $125 shipped.

gsoilcooler.JPG


Keihin 657A throttle bodies. Originally on a 1976 CB750/4. Three of them. $40 shipped a piece, $75 for all three.
Keihin 657A slides and needles. Four sets, awesome shape. $40 shipped a piece, or $75 for all three.

1976 CB750/4 carb rack, choke assemblies (1 missing), and assorted bits and pieces, $20 shipped.

(All the Keihin stuff for $125 shipped)

Mikuni VM26SS throttle bodies. Originally on a 1978 GS750E. $40 shipped a piece, $110 for all four.
Mikuni VM26SS slides and needles. $40 shipped a piece, $110 for all four.
Mikuni VM26SS racks, caps, misc. parts. $25 shipped.

(All VM26SS parts for $150 shipped)

Mikuni BS32SS carburetors. Mystery set...don't know the original bike. They were on a 1976 CB750/4. Spacing is 75 x 81 x 75 (giver take a mm). They were rebuilt then shelved...never saw fuel. Probably still need to be flushed and rinsed. No main jets included. $140 shipped.

Mikuni BS32SS carburetors. Suzuki rack (from 1981 GS750E). Used until I swapped motors, then rinsed and set aside. Worked great. No main jets included. $125 shipped.
 
Forks sold.

Correction to first post...the manifolds are cut originally to fit a 1979 GS750E, but they'll be compatible with a lot of bolt-on manifold bikes.
 
Back
Top Bottom