Freekin' Overload!

DaveS2R

New Member
Hey Guys,

I'm new to the board here... Always been a fan of the Cafe style bikes, but I had no idea the movement was so bloody huge! I LOVE IT! I've been cruising around these pages for a couple of weeks now and I am absolutely hooked. I can't even sleep lately. All I can think about is bikes and the next project??? With that said, I clearly have a few questions for anyone interested in giving a bit of advice....

I guess the biggest question I have is gonna be the simplest and toughest here...What is a good first project bike? I know that this is a somewhat loaded question as everyone on here may be particular to a specific model or manufacturer, and cost is always the next consideration... But I just can't seem to decide. I like the CB's and what people are doing with them, but I am also open to something a little less common to be a little different. What did you guys do for a first bike? What would you have done differently?

I have what I consider to be above average mechanical skills. I have been working on cars, trucks and bikes my whole life. I am also a welder by trade and have been teaching welding at a college level for the past 5 years. That should open up a lot of doors for me project wise...

I have an overall idea of what I would like my project to look like, but I just can't decide what platform to start from if that makes any sense...?

So if you could, please lend a newb some kind advice and help me feed this new freekin' addiction...I have to get started on something soon or the lawnmower might just be in serious trouble!

Thanks!
 
What's up dude? Welcome to the board. And yeah, you've got the fever bad! This place is the best resource on the internet and almost anything you could want to do has been discussed or done here. Use the search function before asking questions like 'Will this tank fit on that bike?' or 'How can i swap for a usd front end?' As far as bikes go, if cost is a factor then I'd go with a cb of some sort or another due to the availability and cheapness of parts. The cb's just make an excellent first bike. Of course I'm biased... I have four Hondas right now with two of them being cb's. The cb360 is the dog of the bunch, but there are plenty of folks here who have fixed that. The yamaha xs650 is another bike that has a huge parts availability. My advice is with your fever at the boiling point, geta a bike that runs or almost runs so that you won't spend a year lamenting how long it's taking. Good luck and I look forward to seeing you start a build thread!
 
It seems you have a good technical background, so I really wouldn't rule out anything. That said, I think your decision should come down to how steep of a learning curve you tend to enjoy.

Hondas are generally the bike of choice around here and that has almost everything to do with price. Honda make more bikes than any other manufacturer in the 70s and so those are the cheapest.

If you're not sure in which direction you'd like to run, try to find something running and titled that needs only a little or no work. Then you can start changing things one at a time so you can get the feel of what you're doing. Unlike four wheeled vehicles, even changing the seating position on a bike will change its handling characterists and so take things in steps.

Also, I know it's easy to get caught up in the "cool factor" and style choices, but remember that it's form that follows function. Café bikes were styled (or at least attempted to be) after the road racers of the time and so the emphasis is on the functional. If it's not there to make the bike go faster or handle better, it gets removed.
 
Welcome to DTT man. Pick up a Yamaha two stroke. Any of the DT, or RD lines are guranteed winners. Parts are still pretty affordable (if youre not going full out race build), theyre light, easy to work on, quick, and a load of fun. The Honda CB line is always great, if not a little white bread now-a-days. The Suzuki T350 or T500 is badass, though getting harder to find. Look up Tims XS650, and you'll see why that model is such a great candidate for cafe treatment. Theyre also still pretty plentiful, with a MASSIVE aftermarket. Good luck with your search!
 
What kind bear do ya want to be a teddy or a grizzle. cb are slow even the big ones. Real bikes dont have valves they got ports. The two stroke stuff is more money for a reason,its better. Plus there is nothing your gonna do to a cb that has not been done to death, there played out. Remember it cafe RACER not cafe what i bought cause it was cheap.
 
hey man a sweet decked out 70's cb350 might be common on this website but how many do you see rolling around your neighborhood???? I have worked on a cb750 which is one of the greatest motorcycles ever. just find it a little heavy to work with try pulling that motor out by yourself. Bigger bikes are cool but my 350 i can roll into my basement and it's not as daunting to know i only have to tune/worry about 2 cylinders when something goes awry. good luck man sounds lik you got the bug bad
 
axeugene27 said:
hey man a sweet decked out 70's cb350 might be common on this website but how many do you see rolling around your neighborhood???? I have worked on a cb750 which is one of the greatest motorcycles ever. just find it a little heavy to work with try pulling that motor out by yourself. Bigger bikes are cool but my 350 i can roll into my basement and it's not as daunting to know i only have to tune/worry about 2 cylinders when something goes awry. good luck man sounds lik you got the bug bad
True that. I have yet to see another cb350 while riding or ever now that I think about. Plus since I only weigh 135 lbs I cant really throw around other bikes like I can my 350. I rode my brothers r6 to work this morning and it's just not the same when cornering.
 
Im not giving you shit, but if your able to ride a CB350 harder in the corners than an R6, youre not doing it right. ;)
 
I'll throw my bias with CB750 aside for a moment and go with... the KZ line-up. Just an absolutely easy to work with set-up. Simple as can be, you don't see many around, lots of aftermarket support and just a fun riding bike. I helped a friend fix up his KZ650 a few months ago and he let me take it out for the first ride as payment. I was blown away at how well it handled, even in stock form and just how darn comfortable it was to ride. That being said, find a junkyard that has lots of bikes, wear dirty jeans and just go around sitting on the ones that haven't been picked clean. It sounds silly, but it'll do wonders for your decision. It'll let you know what "feels right" to your particular body size.

You said you're 135lbs, I would imagine you would want something a bit on the lighter side for ease of use, just remember, old bikes had steel frames and iron engines. My DOHC CB750 weighs in at 530lbs stock. Right now, I've got it at almost 500 even with a half tank of gas. I weigh in at 175 and sometimes, after a 12 hour shift say, I find that it feels a bit daunting for a minute until I get it rolling and relax. Also, the seat rails are WIDE on a DOHC 750, it starts to cut into your thighs on longer rides unless you have a bit of padding wrapped around the sides. There's a lot of factors, so don't buy the first bike that comes up on Craigslist. Waiting a few weeks, or even *gasp* months until you find the "right" bike will save you a ton in the long run. Other than that, welcome aboard.
 
He never said he was 135lbs. That was me talking about myself recommending a cb350 because it doesn't weigh anything. So they are good for us on the lighter side.
 
Then again, at 5'8" and 135lbs (I weigh in at 145 now), I took my Maryland license exam on my father's Yamaha VMax...

First bike was an '81 Honda CB750K

Shiny Side Up!
Bill
 
Hey guys,

Didn't expect so many replies so quick...Thanks for your interest in lending a newb a hand...
I'll try and elaborate a little about myself... Not new to bikes. I have a 2005 Ducati Monster S2R800 and a shit-kicker of a Honda 450 dirt bike... Been riding for quite a few years now.
Not a 135lbs either... closer to 225lbs...(not sure why that even came up...lol)
I kinda like the Honda CB more than the others out there personally. My uncle has ridden them for years and swears by them.
Money is a pretty big concern for me...I don't want to throw a shit load of money into a bike or I would just buy one already built. I kinda like the challenge of building something uber-cool from nuthin'...ya know? Not to say I plan on cheaping out but doing as much as I can myself and trying to refurb/resurrect old cool parts to get where I want to go. Not to say it's not gonna get some cool new shit thrown at it ;)
I found a couple of 1980 KZ 440's in my area...3 to be exact. One in parts for $200.00, one running for $500.00. Not sure why so many at the same time but kinda has me tempted...just not sure. Don't know much about the KZ yet...looks like I have some more reading to do...

Any thoughts on the KZ440? Is 1980 too recent?
 
broncoboy79 said:
He never said he was 135lbs. That was me talking about myself recommending a cb350 because it doesn't weigh anything. So they are good for us on the lighter side.

Yep, got the posts mixed up, thought this was DaveS2R's reply, sorry 'bout that.
 
Money is a pretty big concern for me...I don't want to throw a shit load of money into a bike or I would just buy one already built.

I know exactly what you mean. Even with no mechanical knowledge it was still more important for me to BUILD my bike than it was to buy one pre-built. Something about the satisfaction of a job well done ( or a job attempted). Me, personally, I plan to do as much as I can without taking the engine off the frame. Once I get to that point I figure I'll have a bit more confidence in turning a wrench that I'll ache and yearn for the next "phase" of the project.

As it stands I just dropped about $500 between DCC and ebay shops to get the exterior of my bike kinda the way I want it. Once all that stuff goes on and proves that I know lefty loosey & right tighty I'll worm my way into another project.

Welcome, from one n00b to another.
 
Are these bikes the kz440 ltd? If so I looked at one before I picked up my cb750. A neat midsized twin with a cruiser layout belt drive and a six speed I believe. I haven't been keeping up with big arse projects as well as I should for the past few (6 or so) months but I don't remember seeing a lot of them being turned into cafe racers. It can be done, and probably without too much dificulty. You'll probably have to fabricate your own seat or modify an existing one to fit it. Also I don't remember the tank being cafe friendly, so might need to go another way with that... Or maybe you can make the stock one sexy with some knee dents. Depends on what you're looking for. At your size, which is close to mine, you're going to find a 440 to be too small for you. I'm 6'3 230 and my 72 cb750 is perfect for me imo, but I still catch shit from my buds about needing a bigger bike. Screw them. The dohc cb750's are getting much better as far as parts availabilty. And unlike the sohc's they're still pretty cheap and abundant. I would have recommended a sohc750 a couple of years ago, but prices are getting stupid.
 
They all are LTD... I thought they were a little goofy looking for a cafe platform. Now that you mention it, the cruiser thing is more obvious... Not what I'm looking for. I also thought that a 440 night be too small for me. Kinda even wished I would have bought the 1000DS Monster instead of the 800. I will keep looking for the right CB..750 or up. I notice that the SOHC are stupid expensive! Wasn't sure if it was just around here or I was just being cheap...lol. If the DOHC works easily enough as a good platform, maybe that's the way to go. Different I like, but not interested in reinventing the fuckin' wheel... ;D

Being new to this noise, I do honestly find this project planning a little overwhelming. Not so much to scare me away, but I would like to make sure I have a good platform to work from...maybe I'm getting a little ahead of myself here... I'm gonna keep sniffing around here and try to get some ideas. maybe that will help me decide on a bike to start form...then when I see the right one come available, I won't be scared to pull the trigger...

Thanks for the advise.
 
Back
Top Bottom