Tifun
Indy
Located in Indianapolis.
1978 cb550
Engine has been completely gone through
Replaced burnt factory wire harness with a good clean uncut factory and replaced all supporting doodads like the regulators and junk
Rebuilt front forks in the spring including new springs
New rear shocks in spring
Super bike handlebars
One off rear hoop welded on
One off plate frame holder
One off wire harness tray
Independent headlight and tail light switch
Brand new ebc clutch and heavy duty springs
New clutch cable
Rebuilt, synced and jetted carbs
Vintage velocity stacks
Blacked out engine
Polished side covers
Vintage and extremely rare and hard to find Henry Abe wheels
New tires and tubes
New gel battery
One off rear fender mounted off swing arm
Battery box mounted off swing arm
Newer style brake master cylinder
One off seat pan and seat professionally covered
Kerker full exhaust
New chain
New 43t rear sprocket
Comes with some extras such as inverted forks, cafe seats, header, spoke wheels, etc...price is pretty firm.
Only possible partial trade would be for a rough but running DT250 with title plus coin on top.
$2800. PM or post here if interested. Can meet part way if buyer is serious(puts money down and pays gas to and fro
)
I'd say this is a very reasonably priced bike considering what it costs to get them into this shape. This bike runs very very well and has been witnessed by multiple members on this forum. It leaks a bit out of the shifter seal, pull it and push a new one in. Outside of that it's minor cosmetic blemishes. Overall the bike is truly in great shape for it's age. It does fit 2up if you are skinny and your lady is as well. A bit tight but it does work.
1978 cb550
Engine has been completely gone through
Replaced burnt factory wire harness with a good clean uncut factory and replaced all supporting doodads like the regulators and junk
Rebuilt front forks in the spring including new springs
New rear shocks in spring
Super bike handlebars
One off rear hoop welded on
One off plate frame holder
One off wire harness tray
Independent headlight and tail light switch
Brand new ebc clutch and heavy duty springs
New clutch cable
Rebuilt, synced and jetted carbs
Vintage velocity stacks
Blacked out engine
Polished side covers
Vintage and extremely rare and hard to find Henry Abe wheels
New tires and tubes
New gel battery
One off rear fender mounted off swing arm
Battery box mounted off swing arm
Newer style brake master cylinder
One off seat pan and seat professionally covered
Kerker full exhaust
New chain
New 43t rear sprocket
Comes with some extras such as inverted forks, cafe seats, header, spoke wheels, etc...price is pretty firm.
Only possible partial trade would be for a rough but running DT250 with title plus coin on top.
$2800. PM or post here if interested. Can meet part way if buyer is serious(puts money down and pays gas to and fro
I'd say this is a very reasonably priced bike considering what it costs to get them into this shape. This bike runs very very well and has been witnessed by multiple members on this forum. It leaks a bit out of the shifter seal, pull it and push a new one in. Outside of that it's minor cosmetic blemishes. Overall the bike is truly in great shape for it's age. It does fit 2up if you are skinny and your lady is as well. A bit tight but it does work.