GUZZI V50 flywheel lightening

[Singlecrack]

Ok ...so I have to replace the clutch and crank oil seal..gearbox input shaft oil seal ...so I thought while it was apart I would lighten the fly wheel..any Guzzi v50 owners done this
I,ve not pulled it apart yet but looking at the manual..the flywheel is a bit of an odd shape...is it the fly wheel that you lighten of the starter ring (which looks more like a flywheel )...or both

 

[xb33bsa]

http://www.ebay.com/itm/Moto-Guzzi-V65-V50-V7-Classic-Lightened-Flywheel-Ring-Gear-/271131677419?pt=Motorcycles_Parts_Accessories&hash=item3f20b512eb&vxp=mtr
looks like slots/windows milled out at the perimeter should be easy enough to do with a rotary table in your vertical mill
sure want to be gentle on the clutch usage after a mod like that

 

[Singlecrack]

why would the clutch usage be comprimised.....

 

[xb33bsa]

less mass = less ability to soak heat it will heat up quicker proly only an issue If you are a clutch-beater-slipper ;D

 

[Singlecrack]

ah right......thanks for the info