ponieswhee
New Member
I have an old set of Mikuni VM24-26 carbs which came off a Yamaha YDS-3C (I believe). The YDS had an automix oil system and the carb bodies don't have any 2-stroke specific oil holes, so the bodies should be the same as a 4-stroke carb. I'm thinking switching to a bleed type needle jet should work but I'll defer to the wisdom of someone with more experience. No idea what size jet to start with, any ideas?
Worse comes to worst I'll eBay them and get some Keihin PE24's but new stuff is pricey and I'm a cheap bastard.
Worse comes to worst I'll eBay them and get some Keihin PE24's but new stuff is pricey and I'm a cheap bastard.