Hello from Atlanta

[sp2 jim]

Here are some of my projects and my bikes are

2002 RC51 (SP2) Honda (5000) miles

My 1983 GS1100EC Suzuki with 17000 on the clock

My 1988 CBR600 street fighter

My 1978 GS750/840 GS750EC Suzuki

My 1975 750/836 Honda SOHC (Cr project)

And this is my ATP (American Turbo Pak) that I just bought and its going on the SOHC 836

and last but not least is the KTM500 2 stroke monster that can scare anyone who dosnt know how to ride a big open class bike

enjoy all

 

[Cafe Redneck]

Welcome aboard, quite a collection you have!!! The 78 GS caught my Attention, I'm working on a 77 GS, Those look like GSXR rear sets. Do you have any close up pic of how you mounted them (both sides). Also what jets are you using for the carbs.

 

[sp2 jim]

I can take some close ups but they are from a ZX6
I will have to get the info for the carbs and let you know
Is ready to go to the dyno. The head is from an 850 as the intakes are 34mm
The head is a stage 3 head from Mike Rieck out of Boston.
shim under buckets with lots of titanium to boot

Jim

 

[JustinLonghorn]

Very nice collection, man. Welcome to the site.

 

[Cafe Redneck]

Thanks Jim

 

[sp2 jim]

Here are some close ups of the ZX6 rear sets.
I had to make some adapters and weld to the frame but it was just a matter
of finding a good position for the rear sets and weld
everything is a little ragged as I am about to finish the tuning of the motor with some dyno runs
and then it will get a fresh coat of paint

 

[Cafe Redneck]

Thanks for the pic and the help Jim!!!

 

[sp2 jim]

anytime