Help I need a part and can't find it anywhere

GeeterB

New Member
I am looking for a 1978 gs400x clutch push rod. I cant find one at a dealership, bike barn, ebay, or craigslist. anyone have any other ideas?
 
Partsnmore. powersports Superstore. powersports plus. Speednsport. Boats.net. cyclepartsnation. Motorcycle Superstore. Idk what websites would have what you need but I'm building my own little archive of websites where i can shop for my vintage 2 wheeled pussy getter
 
http://www.leisuretimesportstomah.com/fiche_section_detail.asp?section=91900&category=Motorcycles&make=SUZUKI&year=1977&fveh=2088

This site says "call for price".


It looks like your part number is obsolete, aka superceeded with a newer part number (typical for this vintage). Try giving a few calls to website hosting schematics with the part number listed as superceeded ( lesisuretime or powersportsplus).

Do you still have the original? Whats wrong with it, specifically?

Could you bring it to a machine shop and have a new part fabricated from a steel rod of a specific diameter for cheap?
 
Thanks for the help folks. I will try all those sites till I find the part. I would even like to find the specs on the push-rod so I could have a new one machined at work. The problem with the one I have is that it leaks a crap load of oil out of the push-rod seal. I replaced the seal with a new one from the Suzuki dealership and it still leaks like a bastard. i have gone on-line and tried to look on eBay, craigslist and a few other sites and even though i have had no luck finding the part. I have came across others with the same issue and they had the wrong push-rod in their bike. Plus according to the cartoonish part drawings on the part finder site for Suzuki the rod that they show is considerably different than the one I have. Mine is just a straight rod with no machined areas. The one they show has some spring or gasket type thing on the engine side of the rod, which is similar to what the other Suzuki Gs' of close to the same year. I will let you guys know if I have any luck.
 
Okay after going to several sites I found a cross reference of the other bikes that use the same push-rod. Then I was able to find one on eBay. I sure hope it works. I have been going from major oil leak to major oil leak. This appears to be the last one (I hope). Thanks again guys. I just want this thing to run decently so can get on with the rest of this project.
 
Back
Top Bottom