Help wiring On-Off-On toggle switch

[Bolts189]

So I'm trying to install a toggle switch for my turn signals and I'm having trouble figuring out how to wire it. I'm going to be hooking it up to motogadget turn signals and I'm wiring it up to be kick only. Right now I figure I'll hook up each positive end to the On poles and the negative for both to the Off pole. I can deal with mechanical problems but when it comes to electrical I'm SOL

 

[Sonreir]

You're going to want the turn signal main wire in the middle pole and the left and right positive wires on each outer pole. The turn signal ground wires should be grounded and don't go anywhere near the switch.

 

[Bolts189]

Thanks for the help. I'll be sure to wire it up like you said