Hondazuki XLRM250 Trans-America Hell Ride

hand-exercisers.jpg
 
A little visit to show what this bike used to look like. It started here...

11295620_10206769769552135_8798472736464572764_n.jpg


And now we're here...
d612e7a093d726906afec0984f8e9889.jpg
 
deviant said:
A little visit to show what this bike used to look like. It started here...

11295620_10206769769552135_8798472736464572764_n.jpg


And now we're here...
d612e7a093d726906afec0984f8e9889.jpg

I guess I got lost in the slurry of frames we've hauled around in the makings of this. I completely forgot you went back to square one. And that makes this that much better!
 
Tune-A-Fish said:
Poor thing had to loose it's life to become a donor :-[
He was already injured, so I shot him. I could stick with the 175, but the motor was so damned lethargic. At least with a 250 or 350 motor, you can buy all kinds of go fast parts.

Speaking of which- Anyone want to sell an XL350 motor, or even a 250? Fucking bought one on eBay, but the seller dropped out and it looks like I'm going to be pulling the Money Back Guarantee out of the hat.
 
Damn that just pisses me off to no end...

I might just have what the doc ordered but it ain't gonna be a freebee. I have collected all the parts for the top end (1974 with 800 miles) and sent them to the vapor blaster, I need a cam (maybe) and then I will have all the parts to build a fresh XL3fiddy.

Was building it as a scrambler and have a good chassis and a ton of parts, but I'm moving and need to shed some bloat... Got some hard choosin to do :-\

If I sell it it will be a long block soup to nuts add gas and hold on motor, I even have the shiz to make a Ti exhaust system.
 
Tune-A-Fish said:
Damn that just pisses me off to no end...

I might just have what the doc ordered but it ain't gonna be a freebee. I have collected all the parts for the top end (1974 with 800 miles) and sent them to the vapor blaster, I need a cam (maybe) and then I will have all the parts to build a fresh XL3fiddy.

Was building it as a scrambler and have a good chassis and a ton of parts, but I'm moving and need to shed some bloat... Got some hard choosin to do :-\

If I sell it it will be a long block soup to nuts add gas and hold on motor, I even have the shiz to make a Ti exhaust system.

You know how to get in touch. Keep me posted.
 
I got a bit sweaty from no seller communication, no tracking info, and no shipment notification, but the XL250 motor arrived. This weekend we'll do a tear down and evaluate it's condition. Fingers crossed that it's good inside...

f2b3e9256b616fc5ce4e8eee71dd7ec5.jpg
 
Things look very promising...

eacb8575e6f845d10ee3c2d7c75d4ab1.jpg


6505ab11934aa7e7f78c30ca575aaaab.jpg


It's quite possible I broke the seal on this motor for the first time.

We're looking at some performance upgrades, but in its current state I'm confident it'll run. There's no doubt compression and the top end isn't scorched.


Sent from my iPhone using Tapatalk
 
Back
Top Bottom