Hondazuki XLRM250 Trans-America Hell Ride

you see you guys are all looking at it from a strict simple design ;perspective
not even seeing the elephant in the closet
i am loking at it from a design and rider's perspective
 
Iim thankful for the input. However, 'm looking at it both ways, believe me. I'm also trying to consider how a sharper angle on the intake might effect laminar flow. That said, look down below the carb in the pic. See the clutch basket? I think the carb will work just fine where it is. The filter? Probably not. Might I change it? Maybe. But considering I have no seat rails welded in yet, I have no idea where certain parts of my body will be yet. Given a few steps in the process, I may come to the same conclusion.

Which brings me to this...

I got a sweet rebuilt shock from Kanticoy, so now I can finish the frame and start locating a few things. Plus, I got all the bits to rebuild the swingarm...

744b23759a8e492646fd9c572bf18961.jpg



Sent from my iPhone using DO THE TON
 
you might consider a bolt on rear subframe
i have that nice aluminum one off a first year kl600
all you need is 4 mounting locals
 
xb33bsa said:
you might consider a bolt on rear subframe
i have that nice aluminum one off a first year kl600
all you need is 4 mounting locals
Good call. Thanks. I've been eying a YZ subframe as well. I'm going to dig around this frame this weekend and see where it is.
 
Looks good man. I can see a cool molded abs side panel covering the whole shebang at the end. Adapt and overcome.


Sent from my iPhone using Tapatalk
 
it may function fine ,it is still going to be constantly in your way ,its just terrible for the rider to have that there ,you will have to adapt a new bow legged riding style,it will be much more difficult to pick through dfficult sections of trail ,
it is prone to damage ,it would help you be a lil more comfartable riding especially up on the pegs if you make the right footrest longer,and maybe shift the seat sideways to that side
on another note
what is your wheelbase ?
 
xb33bsa said:
it may function fine ,it is still going to be constantly in your way ,its just terrible for the rider to have that there ,you will have to adapt a new bow legged riding style,it will be much more difficult to pick through dfficult sections of trail ,
it is prone to damage ,it would help you be a lil more comfartable riding especially up on the pegs if you make the right footrest longer,and maybe shift the seat sideways to that side
on another note
what is your wheelbase ?
The carb, and every component from the air filter to the intake is within the profile of the gas tank. Not sure what you expect the width to be here. Yes, it's outside of the 6 inch width section of the XL175, but still not that wide. Total width is 10in at the intake.

I also want to reiterate, this is a dual sport with MX suspension. This is a dual sport with MX suspension. This will ride 80% of the time on roads.

As far as wheelbase, it's 60in. I'm sure you'll say that's too long and that it should be 50 something, like 58.3in. Because 58.3in is the wheelbase of a CR250 and 58.6in is the wheelbase of a CR500.
 
longer wheelbase should help keep front end down (as long as all the weight isn't moved rearwards ;D )
 
We're going to do a little experiment with exhaust and see if we can find some low end torque. I got a kx250 exhaust shell for $25 off eBay. We'll put a 1.5in inlet in it and stick with the stock 1" outlet. Then pack it to be loud as fuck, because Kiley likes that sort of thing.



57253d41ba4e6025e8bff10825343e61.jpg



Sent from my iPhone using DO THE TON
 
deviant said:
Then pack it to be loud as fuck, because Kiley likes that sort of thing.




Sent from my iPhone using DO THE TON

I'm peeing in your bed while you're out riding if you wake me up in the morning. Consider yourself warned.
 
Back
Top Bottom