how to modify tank to fit new petcock.

akaerik21

New Member
Has anyone ever modified there tank to fit a new petcock. After much trouble trying to get my original petcock working I am ready tho give up and get eather a new one or something close to stock off of a late model bike. I'm just not sure if I can just simply cut the old hole out and weld in a new piece of steel that was cut to fit the new petcock. To me it seems kinda simple but I'm sure I'm overlooking something important.
 
If you have the welding skills, you can do that no problem. It is as simple as it sounds.

Just make sure you choose a fairly 'universal' fitting size to weld onto the tank and pick a petcock that will flow the amount of fuel you need (i.e. don't fit a petcock from a 100cc scoot onto your 750cc bike).

Of course unless you're riding something super rare, getting a working petcock would be the easiest route. What make/model/year is the bike?
 
I ordered both of these from ebay- http://www.ebay.com/itm/NEW-SS-FUEL-GAS-PETCOCK-1-4-NPT-Harley-TRIUMPH-Chopper-/290947165968?pt=Motorcycles_Parts_Accessories&hash=item43bdcd6f10&vxp=mtr

http://www.ebay.com/itm/Weld-In-steel-1-4-NPT-petcock-bung-harley-davidson-bobber-chopper-gas-tank-fuel-/121147531061?pt=Motorcycles_Parts_Accessories&hash=item1c34f49f35&vxp=mtr

I used them on my CB350four because I add the CR26 carbs. I moved it back a couple of inches. The tank are thicker on the bottom but not by much. I used a Flux core welder so it wasn't as clean. But it got the job done.

Good luck.
 
What make/model/year is the bike?

my bike is a is a 78 gs550. I was thinking about going with something like this. http://www.ebay.com/itm/09-Yamaha-V-Star-650-Vstar-XVS650-PET-COCK-PETCOCK-FUEL-GAS-SHUTOFF-/130888401624?pt=Motorcycles_Parts_Accessories&vxp=mtr&hash=item1e798e82d8
The seller is right down the street from me so I don't have to pay shipping and I can see it before I buy it. I just don't know what kind of trouble I am going to get into by not running a petcock with a vacuum line. I was reading in another discussion on here that it is okay "to get rid of that POS vacuum unit." Any thoughts on that.
 
The first mod almost everyone ends up doing on a much newer Suzuki (Savage) is a manual petcock. In this case, from the craptastic vacuum version that lets go w/o warning and leaves you stranded in the back side of nowhere, to a Yamaha Raptor 660 sourced one. The vacuum feed line from the carburetor to the petcock is capped off with the little red shipping cap off a new battery, or an epoxy filled .22 shell casing.

If the V-star unit will fit your tank, go for it. Worth every one of the 5 minutes the swap should take.
 
Thanks for the help, I think I will go with the latter of the two for the capping off the carbs. I'm sure my neighbors wont mind me firing off a few rounds if I explain that I'm just working on the bike.
 
Back
Top Bottom