Ignition Coil ~

[Luugo86]

Does anyone know a reputable place I can order a good aftermarket dual tower ignition coil with a resistance between 3-5 ohms, that will work with a 1975 CB200..
Im doing a swap for a bore-tech electronic ignition system and want to also upgrade to the aftermarket dual tower coil, just havin some trouble finding one. Thanks fellas, Cheers!

,Dave

 

[teazer]

Try Mikesxs

http://www.mikesxs.net/products-27.html#products

 

[mydlyfkryzis]

Or Dime City Cycles.

 

[cxman]

i use these on my high performance engines a bit pricey but awesome output and quality

http://www.nology.com/profiremotor.html

 

[mydlyfkryzis]

Mice coils, but only 3 ohm and 0.6 ohm.

For a point ignition, they are going to draw more current, and be harder on the points. The site does not recommend them for point ignition either. O.K. for CDi or electronic.


A 3 0hm draw 40% more current. With our minimal charging systems, the extra can put you over the edge.

 

[cxman]

he did say he was adding electronic ignition

 

[mydlyfkryzis]

Just stated it for others reading it...'

 

[Luugo86]

Thanks fellas for all the input. Cheers