So I got these carbs with the bike and I am having a hell of a time getting them tuned.
Here is what I got back from the mechanic.
Main Jet - 85
Pilot Jet - 30
Jet Needle 6dh7
Needle Jet - 159 P5
Air Jet - 2.0
Slide - 3.0
c-clip set at the leanest position
Pod filters
They also advanced the timing to lean it out. (I am not to clear on what the effect of advancing the timing does)
With the original megaphone mufflers and spec plugs I was getting 12 miles to the gallon! You can imagine how smokey and smelly the bike was. Told this to the mechanic and he told me to put in hotter plugs. After I put in hotter plugs I was getting about 22 mpg. Still unacceptable and obviously not tuned. (oh yeah did I tell you how they wanted to solder my jets and drill them out because the right jets weren't "available" through his supplier!? Like he can't order the right jets from any number of places?)
So after paying this mechanic $300+ to not tune my bike properly I decided it was time for me to stop being shy about carb work.
Well I call Sudco who says my main jet is way out of range and sell me a 190 along with a Mikuni 35 pilot jet (the 30 I have doesn't have the official Mikuni stamp). The guy from Sudco also tells me to go to straight pipes to lean it out a little more.
Here is what I have currently:
Main Jet - 190
Pilot Jet - 35
Jet Needle 6dh7
Needle Jet - 159 P5
Air Jet - 2.0
Slide - 3.0
c-clip set at the leanest position
Pod filters
Straight pipes
I do all of this but the bike seems to be way to rich still. When I give it throttle to quickly it sounds like it is filling with gas and bogs down for a a few seconds even after I let off the throttle. It still smokes and the plugs are gunked with carbon. Obviously still to rich (considering the only thing I did to lean it out was straight pipes and everything else richened it... not to surprising).
Anyways, I figured I would go back to the 30 pilot jet, and it still bogs down, so now I am thinking the main jet is to big (because besides that, the only other thing different is the pipes). But what confuses me is that it bogs down at 1/8 throttle and up, way to low for the main jet to matter.
Are these carbs just to big for a cb350? Does anyone have experience tuning these carbs for a 350 or similar bike?
I could sure use some help.
Thanks
Here is what I got back from the mechanic.
Main Jet - 85
Pilot Jet - 30
Jet Needle 6dh7
Needle Jet - 159 P5
Air Jet - 2.0
Slide - 3.0
c-clip set at the leanest position
Pod filters
They also advanced the timing to lean it out. (I am not to clear on what the effect of advancing the timing does)
With the original megaphone mufflers and spec plugs I was getting 12 miles to the gallon! You can imagine how smokey and smelly the bike was. Told this to the mechanic and he told me to put in hotter plugs. After I put in hotter plugs I was getting about 22 mpg. Still unacceptable and obviously not tuned. (oh yeah did I tell you how they wanted to solder my jets and drill them out because the right jets weren't "available" through his supplier!? Like he can't order the right jets from any number of places?)
So after paying this mechanic $300+ to not tune my bike properly I decided it was time for me to stop being shy about carb work.
Well I call Sudco who says my main jet is way out of range and sell me a 190 along with a Mikuni 35 pilot jet (the 30 I have doesn't have the official Mikuni stamp). The guy from Sudco also tells me to go to straight pipes to lean it out a little more.
Here is what I have currently:
Main Jet - 190
Pilot Jet - 35
Jet Needle 6dh7
Needle Jet - 159 P5
Air Jet - 2.0
Slide - 3.0
c-clip set at the leanest position
Pod filters
Straight pipes
I do all of this but the bike seems to be way to rich still. When I give it throttle to quickly it sounds like it is filling with gas and bogs down for a a few seconds even after I let off the throttle. It still smokes and the plugs are gunked with carbon. Obviously still to rich (considering the only thing I did to lean it out was straight pipes and everything else richened it... not to surprising).
Anyways, I figured I would go back to the 30 pilot jet, and it still bogs down, so now I am thinking the main jet is to big (because besides that, the only other thing different is the pipes). But what confuses me is that it bogs down at 1/8 throttle and up, way to low for the main jet to matter.
Are these carbs just to big for a cb350? Does anyone have experience tuning these carbs for a 350 or similar bike?
I could sure use some help.
Thanks