Teazer, the bodywork started out as ever with good old CAD [ Cardboard Aided Design ] !
I sketched the form I wanted onto a piece of cardboard and on the 3rd or 4th variation I had the lines where I wanted them. Then it was just a matter of picking up on the BMW fixing points. Once I was satisfied with that, I sketched in where I wanted the shaping - nothing worse than flat alloy in my opinion.
The seat base was an old R1 unit which I reshaped and joined up with the side panels. I cheated with the actual seat ... I had a "Police" single seat unit and just fettled everything to fit around that. Gives me a super comfy seat with it's own original fittings. I'll get that recovered in the black perforated Jaguar Connolly hide I have
At that point I sent it to ace tin basher Pete Kyte .... he's the guy that all the UK museums [ and Japanese factories ] to for new / repro tanks, fairings etc. He transformed my cardboard and sketches into the shape you see.
Once I had the alloy panels, I got my pal at RAM to take moulds and produce a couple of sets of side panels for me.
Pete Kyte also modified the seat for me and again - moulds taken.
I still have all the Pete Kyte alloy originals, and if I can persuade my polisher to come out of retirement I might just get a tank and the side panels highly polished [ tank is alloy ] just for the craik.
Just for reference - the Black RS is how it all started out ! I paid £600 for it with a full MOT and rode it back from Heathrow Airport to Redditch. I sold all the unwanted parts, fairing, panniers, top box, exhaust, bars ............. for £945 !!!!
I sketched the form I wanted onto a piece of cardboard and on the 3rd or 4th variation I had the lines where I wanted them. Then it was just a matter of picking up on the BMW fixing points. Once I was satisfied with that, I sketched in where I wanted the shaping - nothing worse than flat alloy in my opinion.
The seat base was an old R1 unit which I reshaped and joined up with the side panels. I cheated with the actual seat ... I had a "Police" single seat unit and just fettled everything to fit around that. Gives me a super comfy seat with it's own original fittings. I'll get that recovered in the black perforated Jaguar Connolly hide I have
At that point I sent it to ace tin basher Pete Kyte .... he's the guy that all the UK museums [ and Japanese factories ] to for new / repro tanks, fairings etc. He transformed my cardboard and sketches into the shape you see.
Once I had the alloy panels, I got my pal at RAM to take moulds and produce a couple of sets of side panels for me.
Pete Kyte also modified the seat for me and again - moulds taken.
I still have all the Pete Kyte alloy originals, and if I can persuade my polisher to come out of retirement I might just get a tank and the side panels highly polished [ tank is alloy ] just for the craik.
Just for reference - the Black RS is how it all started out ! I paid £600 for it with a full MOT and rode it back from Heathrow Airport to Redditch. I sold all the unwanted parts, fairing, panniers, top box, exhaust, bars ............. for £945 !!!!