KZ front end, complete, NICE shape.

[m357.5]

Comes with everything in the pic's, new Russel braided brake line, new SBK bars...etc. Pads are 90%, tire is more than useable. $200 or trade ?

 

[Swagger]

this is a good solid front end that'd be great on a cafe or a bobber.....someone buy this, it's a slamdunk!

 

[arcspeedworks]

Tempted.... Very.... Very... Tempted....

 

[Tim]

Shit, the master cylinder, braided line, caliper, rotor, wheel, bars... there's a lot of value in there for $200.

Definitely a good buy for a complete front end. What size are the forks?

 

[m357.5]

36mm forks Tim.

 

[supercafe]

where are you.....................?
i might be interested, if the forks would fit my cb500.

if you know that the parts would fit please get back to me, i need all the brake set up, caliper/master lines, etc. just let me know.

maybe tim or some one would know????

thanks,
later.

 

[m357.5]

I think your 500 will have 35mm tubes so you wouldnt be able to just swap forks...you'd need the tripple clamps as well. You may be able to find steering head bearings with the KZ inner diameter and the CB outer diameter...then you just swap everything over.

Stem diameter for the KZ is 30mm for both the upper and lower bearings...not sure about the outer diameter on a CB.

I'm in Owen sound....2.5 hours north of Toronto on Hwy 10

 

[m357.5]

I'll trow in the Kawasaki headlight with built in speedo and the headlight bracket for an extra $50. Think I've got a small tach kickin around I'd trow in for $10 too, and a set of bullet signals ( X4 ) for another $30. Make for a COMPLETE front end.

http://dotheton.com/index.php?topic=14066.0

 

[m357.5]

Need this gone, could use the cash to help finish my build.

$200 and I'll throw in the headlight/bracket/signals/speedo/tach.....you pay shipping.