Ladies and Gentlemen! Please allow me to introduce myself!

Bennett

New Member
Hi everyone,

I'm Bennett. I'm from Connecticut, USA. I was recently GIVEN my dream bike, a '73 CB350 custom cafe... the only catch is... I need to build it.

Before I go on about myself, I'd like to say I've been Googling various aspects of my upcoming build, and I kept running into threads on this forum. Every thread has had 2-3 VERY helpful people, that have seemed genuinely interested in solving the OP's problem or answering their question. I'm involved with many forums, I've even helped run a few, and I can tell you that what you have here is rare and special. I had to become a part of this community.

Anyway, here's the story of my bike. I've been involved with a local motorcycle community for years, mostly sport bike riders that are involved in racing (legal racing on a track) and lots of guys/girls that just like to hit the track on the weekends. One of those guys got this bike in stock running condition and wanted to make it into a track bike. After stripping it down he lost interest in the project and passed it off to one of my best friends. He wanted to do the same thing, but recently fell into a Triumph Street Triple R track bike project. Knowing how much I like Cafe's he gave the CB to me.

It's in rough shape, but most of the parts are here and look to be in functional order. kickstand and the center stand were cut off, So I'm bringing it to a welder tonight to help me address that. The frame has a split where water froze in it, so I'll have him fix that too.

My first project is going to be cleaning and kremeing the fuel tank, then rebuilding the carbs, and setting up the ignition system, so I can see that it runs.
The Intake and Exhaust ports on the motor weren't sealed when the exhaust and carbs were removed, so I may pull the head to make sure the cylinders are clear. (worm hole in the making, no doubt).

Here's some photo's for your entertainment.
 

Attachments

  • IMG_0033.JPG
    IMG_0033.JPG
    1.9 MB · Views: 346
  • IMG_0036.JPG
    IMG_0036.JPG
    1.9 MB · Views: 328
  • IMG_0039.JPG
    IMG_0039.JPG
    1.7 MB · Views: 319
  • IMG_0041.JPG
    IMG_0041.JPG
    1.7 MB · Views: 357
Leave the gas tank for a later time, and just do the carbs and ignition for now, you can set up an auxiliary gas tank, which will also come in handy when you have to sync the carbs down the road.

CoolantReturn_Mounted.jpg

Welcome to DTT
 
Just my personal opinion based on experience, but don't Kreem a tank. Had a couple of failures myself and have had several tanks brought into the shop by customers with Kreem failures. We have had the best luck with either Caswells 2-part epoxy or POR15.

BTW, Welcome to the little world of DTT. If you can tolerate all the BS and wise-cracks, etc. there any number of good, helpful, but a bit insane people on here.
 
Welcome to DTT, hope we can help. I have read horror stories on Kreme so I would suggest if you need to coat inside the tank POR-15 or the Caswell product. Check them out, lots of guys I know personally swear by either of those, and all have had to deal with tanks previously Kremed that had failed. I have no personal experience. my 3 projects have all had servicable tanks.

Cheers,

Maritime
 
CharlieT said:
Just my personal opinion based on experience, but don't Kreem a tank. Had a couple of failures myself and have had several tanks brought into the shop by customers with Kreem failures. We have had the best luck with either Caswells 2-part epoxy or POR15.

BTW, Welcome to the little world of DTT. If you can tolerate all the BS and wise-cracks, etc. there any number of good, helpful, but a bit insane people on here.

LOL you beat me to it but proved my statement ;D
 
Good call with the temporary tank. I'll do exactly that. I'll look into those other products for tank sealant. I used kreme on a suzuki katana and it went really well... I also just happen to have an unopened kit, maybe I'll pawn it off on someone else.
Thanks for the welcome/warning. I'm a career firefighter, so "BS and wise-cracks" are a daily part of life, along with shenanigans and practical jokes.
 
Back
Top Bottom