I did not know where to post this question. So I rebuilt my Cl350 motor, it ran great for 3,000 miles, and then all of a sudden it while going 55mph it started in 5th gear it started running sluggish, as if it was running on one cylinder and then it just died. I took it home and began to take it apart. I found that one of the pistons and cylinder where badly worn so I replaced them along with new rings on the other piston. I cleaned out the carbs very good and also the spark plugs, put it all together and road it for a couple of days, now ti is doing the same thing. It has no power in 4th and 5th gear and then just seems like it wants to die. I tested the coils and wires and they are fine, but the wires have slight cracks in them. I replaced the points also. I have been through this bike more than anything and I cant figure it out. Please help