Mikuni Group Buy - April 2012

Sonreir

Oregon
DTT SUPPORTER
Hey all,

I figure it's about time for another group buy on the carbs. Prices are up (slightly), but my supplier is raising them again in May and so I wanted to get another one of these deals going before then.

The following carbs are available and there is two prices for each type. The first price is for a single carb, and the second price is for a pair. Furthermore, this price includes the cost of priority shipping within the USA. Canada will be $20 more. I can ship to other countries as well, but please check for prices before ordering. Target total order value to qualify for these prices is $600, so if we don't hit that amount, prices will be slightly higher for all participants as the discount I receive with my supplier is only good for bulk orders. Buys can pull out of the transaction any time before I place the order with my supplier. After that, you're getting the carbs whether you want 'em or not. ;)

All orders should be placed within this thread and I will then send you a PM with my paypal details. Money orders are accepted as well, but only those issued by the US Post Office (sorry international folks). I will post in this thread when the funds are received and again when the carbs are shipped out.

Closing date for this deal is Friday, April 13th. One week from today. The expected arrive date for your new carbs will be on or about April 20th. International shipment will, of course, take longer.

Finally, this sale is for the carbs only and they come with standard jetting from the factory. Expect that you will need to change the jets for your application and may need new carb manifolds and throttle cables as well. I do not supply these extras at this time though these carbs are widely used and quite popular. You shouldn't have much trouble tracking these parts down.

So... without further ado:

VM28 Flatslide $125, $230
VM30 $ 95, $180
VM32 $ 85, $160
VM34 $ 85, $160

Thanks,
Matt
 
do these come with the choke levers? on th vm30's that is

thanks for taking the time to put this together man,i know how much time something like this can take.

thanks in advance
matt
 
Choke levers are included on each carb. Seperate linkage will be needed if you want them to operate from a single lever or from a pull lever on the dash (as some bikes have).
 
Just curious are these the same 30mm?

http://www.amazon.com/Mikuni-Round-Slide-Series-Carburetor/dp/B000GZK7IY
 
Sonreir,
What sizes is it that they use on the xs650, do you know? Also the 30vm will need a special boot for the CB350 right?
 
ProSimex said:
use a 34on the 650. i think 30s are too big for the 350.

I'd say 34s on the 650 as well. Also... VM30s will work on a 350, but they are a tad on the larger side. The VM28s will work better, though.



To everyone else... still no PMs received. I think we probably have enough interest to go for it, but I still have yet to receive any payments. Remember, please PM me for my email address or physical address so that payment can be made.

Thanks,
Sonny
 
cjrenick said:
Sonreir,
What sizes is it that they use on the xs650, do you know? Also the 30vm will need a special boot for the CB350 right?

I run 34's on my XS650 with 190 mains I think (will double check). 34's are good. Have 32's on my BMW R75 and will be running another set of 34's on the 750 big bore XS650 engine and have a 36 for my SR500. I like VM carbs and having all the same makes having lots of spare jets etc. around easy.
 
Dear Sonreir,
I am in for a set of VM34. Quote me the shipping to Vietnam if possible.
Many thanks
 
Viet,

For some reason the post office web site is only showing rates for Priority Mail to Vietnam and the price is coming up as $47. I'm pretty sure I can get it for less than that, so you wanna call it $25 extra for shipping?

Thanks,
Sonny
 
Dear Sonreir,

Thank you, please let me know your paypal and when i need to send payment. Many thanks
 
Back
Top Bottom