My CB750F3 Build

cmonSTART

New Member
Hi Folks! I wanted to share a photo of my current project, a 1978 CB750F. It sat around outside for quite a while before I bought it. The engine was stuck and everything was pretty trashed, but I've stripped it down and have been putting things back together for the past year. This picture shows the tank in place with the rear cowl, as I'm currently figuring out what exactly I'm going to do with the seat/rear cowl.

mockup_zps1fd225c0.jpg


Thanks folks, great site! It's full of ideas!
 
I've uploaded some more pictures of the process, as well as one of the starting point. It's been a long road so far and really I don't have that much more to go. The biggest purchase for the bike I have remaining is the exhaust, which I still am undecided on. The rest mostly is odd stuff here and there.

I'm making my own rearsets from the stock parts as well as some scavenged from an 80s Honda Sabre. That's probably the biggest task I have to finish. I also have to make a seat pan.

It's slowly getting there.
 

Attachments

  • cb750.jpg.jpg
    cb750.jpg.jpg
    263.2 KB · Views: 337
  • frame.jpg
    frame.jpg
    290 KB · Views: 330
  • carbbank.jpg
    carbbank.jpg
    259.5 KB · Views: 342
  • paintedengine.jpg
    paintedengine.jpg
    249.5 KB · Views: 321
The engine wasn't all that stuck and probably would have come free with a bit of work, but I tore it down anyway so I could look things over. The bottom end was in great shape, the cylinders really only needed a bit of cleanup for now and a new set of rings. The head, being an F2/3, really needed a lot of love. New valves and guides etc.

I will probably take the engine down again in a year or so and actually put some decent parts into it (836 kit, better rods, etc.) after I ride it for a while.

So there ya go. As I said before, great site!! It's full of ideas and information!
 

Attachments

  • sodablast.jpg
    sodablast.jpg
    109.6 KB · Views: 297
  • cylinders.jpg
    cylinders.jpg
    157.3 KB · Views: 329
  • bottomend.jpg
    bottomend.jpg
    265.6 KB · Views: 317
  • caliper.jpg
    caliper.jpg
    253.8 KB · Views: 333
Thanks folks!

It is the stock rear cowl, which I would like to reuse and incorporate into the seat pan. I like the shape.
 
I stripped the exterior of the tank today and found some nice old Bondo work. It's going to take a lot of filling and sanding to get this thing smooth!
 

Attachments

  • strippedtank.jpg
    strippedtank.jpg
    156.1 KB · Views: 307
Hi mate yup know that feeling ; :( stick with it bud great feeling when its sorted :D i wanted to polish /chrome my tank its off a cb400f but am throwing it on a cb 350f but after stripping back it was bondo time now its gonna be painted
 

Attachments

  • 785.jpg
    785.jpg
    1 MB · Views: 321
  • 792.jpg
    792.jpg
    1.2 MB · Views: 323
  • 793.jpg
    793.jpg
    1.1 MB · Views: 332
Back
Top Bottom