Re: My Suzi T500 Project *Update*
I have the engine apart now and found transmission oil in the crankcase so it must have leaked through the dodgy center seals. I will be sending the crank off to Bill Bune this week to split it and install the new seals. He will also be removing the oil slinger washers from the crankshaft and replacing them with a small diameter shim washer as I have decided to run the bike on premix. I'm also sending them the cylinders to bore them for the new Wossner forged pistons.
While that is being done I am going to totally go through the carbs even though they are almost new they have had ethanol fuel in them and they have sat for at least a year so who knows what that will be like in side. No more ethanol for me in this bike
On a different note I have also decided to run clipons now in favor of the high bars. I am going to be riding the bike at trackdays mostly so this will make it more suitable for that. I have other bikes with high bars ;D I will be looking to add an electronic tacho/speedo as well probably an Acewell. Not sure how easy that is to install yet.
I have the engine apart now and found transmission oil in the crankcase so it must have leaked through the dodgy center seals. I will be sending the crank off to Bill Bune this week to split it and install the new seals. He will also be removing the oil slinger washers from the crankshaft and replacing them with a small diameter shim washer as I have decided to run the bike on premix. I'm also sending them the cylinders to bore them for the new Wossner forged pistons.
While that is being done I am going to totally go through the carbs even though they are almost new they have had ethanol fuel in them and they have sat for at least a year so who knows what that will be like in side. No more ethanol for me in this bike
On a different note I have also decided to run clipons now in favor of the high bars. I am going to be riding the bike at trackdays mostly so this will make it more suitable for that. I have other bikes with high bars ;D I will be looking to add an electronic tacho/speedo as well probably an Acewell. Not sure how easy that is to install yet.