need some custom exhaust headers/pipes or have some made

mark13018

"In the age of information, ignorance is a choice
Looking to buy or have someone make me some custom headers for my cl450. I'm having a hard time finding a local shop that can mandrel bend or whatever and is willing to do it. I have a 1971 honda cl450 and want new pipes bent to match the profile of the stock ones but be about 6-8 inches longer. They can be any metal and bare also. I don't want them to be welded or have kinks/wrinkles in the bends at all.. this is one thing I haven't got into making myself yet and could use some help. I will pay for them if someone has them or pay someone with proper knowledge to make them. If anyone can help or has some advice please let me know. Thanks, Mark
 
Called some exhaust shops in my area and got no where... Anyone out here have any recommendations or have the capabilities to do this?
 
You're not going to find an exhaust shop that can make the tight bends required to duplicate those pipes.
I've been doing custom work for a long time on hot rods and bikes and the only way you'll get what you want is by custom welding them from various bends and what they call donuts wich are essentially a complet O shaped exhaust pipe from wich you cut out the bends and elbows you need.
Properly done you can't tell them apart from mandrell bent systems .
Remember the factory had special dies made up to bend these to begin with as well as special benders.
Good luck
 
If you're not concerned with the finish, just weld matching pipe onto the stock headers to add the length you want. Have the stockers blasted to remove the chrome and go from there. Once finished, you can have them coated any way you like.
 
It'll be WAY cheaper than having customs made or even buying all the blanks you'll need to make a set (not counting the hours opon hoirs of welding you'll need to do.
 
Thanks for the info.. the pipes I have on it are in very nice shape and I'd really rather not cut them but I may have to. Someone who's restoring one would love to have the pipes I have. I'll see if I can find a rough set to cut up from ebay or something. Thanks guys!
 
i spent months looking for someone to mandrel bend pipes for me .... nobody has a mandrel anymore to expensive . i found one guy that has one at his house . but VERY pricey . he builds headers for race cars , so if you have a track around you ask race car owners
 
Back
Top Bottom