new guy from Montreal Quebec with a gl650 cafe build

helithumper

New Member
Hey guys, Just thought I would give a shout out to everybody. I'm have always been on bike and always worked on my own bikes so I decided to convert a Honda gl650 into a café racer. This is were it stands now but I would like to but a cx500 deluxe tank on it instead of the bmw k100rs tank. I have done a lot of work to the bike but nowhere near finished.
 

Attachments

  • gl650 shotos 134.jpg
    gl650 shotos 134.jpg
    4.6 MB · Views: 312
  • gl650 shotos 119.jpg
    gl650 shotos 119.jpg
    4.2 MB · Views: 317
Them's some big holes in that top triple.


Not saying it's unsafe, but if it was me I'd get them welded shut.
 
Ya I thought about that. The structure ribs on the bottom side are still intact, the only thing I machined off are the mounts for the handlebars. I like the look of the triple clamp with the holes but I'm not 100% sure how much I weakened them by cutting them so I might weld them.
 
Nice start, welcome to DTT. I have a slightly modded CX500, the 650 can really move and if you want it to fly check out Member CXman he makes mikuni carb kits with custom intakes for these that really wake them up. a set are on my wish list. Not sure on the holes. I have seen that done before but never heard if there were problems from it.

Cheers,
 
The carb kit is on my wish list. I Want to get the bike up and running before I do the carb kit. This way I will also be able to see the difference when installing the carb kit.
 
a silly and self frustrating way o doing it

you will spend at least 100-150 on carb parts to rebuild the stock ones

if you dont break anything stripping them you have to hope they are in good shape fro m the last guy

then you get to try and sort them out with pods

so you can then take them off?????

why not save the time effort and frustration and bolt the brand new calibrated set of carbs on and not have to screw with a thing?
 
Spoken like a true salesman, LOL ;D ;D

The carbs are in good shape and cleaned for the winter. The bike was running when I bought it but I only drove it around the block. I know I will have to rejet the carbs and make some adjustments but I don't have 1000$CAD to spend right now on carbs.

I will probably be getting the pod filters from you so that way when I get the carbs I know they'll work well together.
 
nope go read the thread on my carbs that is a complete repeat of what most say

i dint have to sell these lol

pm me when close to ready and i can get the jets in you will need and send them with the pods
 
Back
Top Bottom