New Petcock or can this be repaired? 68 CB350

CatEyez13

New Member
Hi all ... I'm SO new to all this but I like to get my hands dirty and get in there but of course there are always questions and what better place to ask than here. :)

I just removed the tank from my 68 Honda CB350 to clean and of course took out the petcock as well. I noticed something missing lol. Here are some pics of its current state. The base of the second tube is rusting out and of course missing. Best to just replace it or is it an easy fix?

Thanks in advance!
Cat
 

Attachments

  • petcock1.jpg
    petcock1.jpg
    338 KB · Views: 276
  • Petcock2.jpg
    Petcock2.jpg
    248.6 KB · Views: 275
  • Petcock3.jpg
    Petcock3.jpg
    347.1 KB · Views: 269
thats just a wire mesh "pre filter". Not essential. If you feel obligated to filter your fuel, run in-line filters. if not, make sure your tank is clean. No need to buy a new petcock unless it leaks.
 
Thanks BC! That's a quick response and while I'm here ... lol to get all that crud out of there, what works best?

Thanks again - really appreciate it!
 
If the petcock is that nasty, what does the inside of the tank LQQK like???????? If the tank is rusty, your going to want a filter screen on the petcock............. Buy one of these coffee filters and make a new screen filter to cover the reserve intake. http://compare.ebay.com/like/130899655348?var=lv&ltyp=AllFixedPriceItemTypes&var=sbar
 
The tank wasn't that bad. In the process of cleaning it and then I'm getting it professionally sealed. Thanks for the coffee filter tip!
 
Back
Top Bottom