Nibs in Enamel

[Mr Biggz]

Any tips or advice to remove the dust specks I unfortunately encountered in this rattle can job I just finished?

Paint: Duplicolor Fleet coat gloss back enamel

Material: cast iron

 

[SONICJK]

Wetsand and buff is about your only option.
You coudld try a clay bar first and hope for the best.

 

[pidjones]

And, you can wet sand then 2k rattle can clear coat.

 

[Maritime]

Wetsand like above but if you need to re-coat make sure you wait the time on the can or you'll get even worse issues.