Noob in philly

Rob5zat

New Member
Been lurking for the last month or so trying to soak up as much knowledge as I can, there's a lot to be had here. Finally picked up my first bike last night, as 81 CB750K. Runs pretty strong but has only starts with a pretty good bump, battery is on tender now so we'll see. Not sure what direction I want to take it, kinda have to learn to ride first so i don't want to go cutting anything up just yet.

67296_490576717674544_974285427_n.jpg


I'm planning on swapping out the coils for a set from a CBR and going with a slightly hotter plug, along with a stronger battery I'm hoping this will help the starting issue, or maybe it's just too damn cold in Philly right now. I have the current exhaust, look and sound, so I'm gonna grab a 4 into 1, recommendations welcome, but leaning towards a Carpy. Decent pods and new jets should get round out the hop up, again, recommendations welcome.

I figure I'll ride for a little bit before sorting out the aesthetics, im leaning more towards a brat style, we'll see.

In the mean time I'll be learning as much as I can from all you guys and my local shops

Cheers!

R
 
Rob5zat said:
I'm planning on swapping out the coils for a set from a CBR and going with a slightly hotter plug, along with a stronger battery I'm hoping this will help the starting issue, or maybe it's just too damn cold in Philly right now.

Hotter plugs? What for? That will have NO effect on cold starting and will just cause you to have plugs that run too hot when you are running the bike, which could cause serious problems like detonation and holes in your piston.

You DO need a good battery, but any normal, stock battery that is a good battery will suffice. The stock coils will also suffice. Don't try to re-engineer with random ideas to solve a perceived problem when all you need is a battery that works.

These bikes can be tough to start in cold weather. They run lean to begin with, and motorcycles were not really meant to be used in cold weather. Cold weather starts can be problematic. Sometime a little shot of starting fluid works magic.
 
Thanks AD, guess it makes sense to get the battery sorted out first and follow things down the line.

I've been getting random info from all over the place and been trying to parse out what makes sense, as usual simpler is probably better.
 
If that is an actual picture of the bike in your first post, I am not sure why you want to mess with it. It's beautiful. I think you should ride it.

You are a new rider. You don't need to hop it up. You need to get some saddle time. Ride that motherfucker and think about mods to it NEXT winter. The riding season is upon us. Don't get mired down into building a bike. You have a completely serviceable and beautiful bike. Don't start tearing it apart and turning it into another fucked up monstrosity that looks like a refugee from a zombie movie.

You may be surprised at just how much attention this bike will garner just like it is. Enjoy the bike, learn to ride. Think about small projects that you can do over a weekend. Little things like changing the handlebars. Also, go through the bike a little at a time. Change the fork oil. Repack the wheel bearings. Polish things. But above all RIDE IT.

It's not like you have some rusty dysfunctional piece of crap on your hands that needs a lot of work. Leave it alone. Learn how to wrench on it my doing maintenance and small things. Most importantly, keep it in running condition and RIDE IT!

If there is anything that you need help with, I have a shop in Glenside.

Scott McCarty
Alpha Dog Customs
3009 Mount Carmel Avenue
Glenside, PA 19038

215-887-0870
267 626-4594 cell

http://alphadogcustoms.com
http://www.facebook.com/AlphaDogCustoms
alphadog@alphadogcustoms.com
 
You've officially shifted my focus, thanks for the wake up call! What got me really interested in getting a bike in the first place was helping my buddy tear apart and now rebuild his '79. The big difference is that his was pretty shitty and needed it, I got lucky and a really clean bike fell into my lap. I think you just saved me from wasting a lot of time and money.

Miles are definitely my first priority and I think I will just stick to the little projects that won't keep me off the road much this season. I live about 500 yards from castandsalvage.com/, but I'll definitely be making a trip out to your shop as well.

Thanks Again

If you need a hand with that website, lemme know. Webdesign, unlike bikes, is something I'm not a noob at
 
I pretty much suck at Web design, and I never seem to get around to doing regular updates. It was easily 6 months ago that I did the basic structure of the site, planning to add more content later, and I never seem to get around to it.

I did a shitload of work on a guy's bike once, with the promise that he would help me with my Web site. He doesn't return my emails. >:( I only charged him for parts, and I put about $1,000 worth of labor into his bike.

Glad I was able to bitch-slap you back to reality. Yes, working on bikes is compelling, but the reason we have bikes it to ride them. I consider working on them just as important, as a hobby, as riding them, but I swore a long time ago that I would never again tear down my only working motorcycle. I try to encourage new owners to concentrate first on just getting a bike running and rideable. The big mistake all too many guys make is they get something, and the first thing they do it tear it all apart, whether it needed it or not. A lot of those bikes never run again. The owner gets in waay over their head, gets tired of the project, and it sits in boxes for months or years. They forget how it goes back together, parts get lost or ruined, and it ends up going to the next sucker as a fucked up basket case.
 
Back
Top Bottom