'nother noob, 'nother CB350

HondaCBGuy

Active Member
147.jpg


So heres what I'm starting with. '71 CB350 (anyone tell me if that tank is original?)
You won't see an engine atm because that is beyond me for the time being. Someone else gets that job. What I'm attempting with my available tool kit and skill set is already daunting enough. Money is tight so this may be a slow build too. But I will do what I can myself to save the money.
Plans are for a lowish bike, with a military style look, fairly businees like but with a flair of colour in the green I have chosen for the tank. Neat, tidy and done right is the plan.
Wish me luck....
 
Tank is not stock if this is an actual CB. The tank is from a CL. CLs are very similar to CBs. Check the stamp on the neck. If it is a CB the number string will start with CB350XXXXXX, if a CL it will be CL350XXXXXX.

CB/CLs are awesome bikes. I have built several. Good luck.
 
Good luck man. And thats actually an SL tank. Not CB or CL. SLs have different frames, but you should be able to make it work for you. If not, sell it and get a stock CB tank. You could sell the SL tank, buy a CB tank, and have money left over.
 
Frame is CB. I thought the tank might be a late 60s Supersport. I like it. Fits well. Can already see how it will be. Not sure about the fabbed seat pan that came with when I bought it. We'll see when we get to that point
 
Re: 'nother noob, 'nother CB350 - Engine Update

So the guy fixing my engine finally got to it. Turns out the bottom end is in very good condition. The top however is a different story. #1 cylinder had almost welded itself to the valve. Cylinder is scored so it will probably require a rebore. It doesn't appear to have been bored before so we are currently searching Ebay etc for .25 o/s pistons & rings. The cam is badly pitted also. I think I remember readiing somewhere on here (or somewhere) that the late 60s cam is sought after by vintage racers as it is lumpier and goes straight in. Can anyone verify (or reject) this as there is one sitting on Ebay atm?
http://www.ebay.com.au/itm/68-69-HONDA-CL350-CB350-CAMSHAFT-CAM-SHAFT-RARE-/390349421164?pt=Motorcycles_Parts_Accessories&hash=item5ae2a37a6c

In other news.... just some cleaning and polishing. Will have pics of shiny bits and engine up next week. I need to bite the bullet and get some polishing whhels for my bench grinder.
Also, I may have found a guy who does industrial part painting who may give me a cheap option on a painted frame. Needs more investigation.
 
Looks like a start. Dont assume that anything on that bike is beyond you. Tearing down a bike is like cooking food, ya just gotta follow the recipe. Get yerself a manual and some good metric tools. Of course you probably cant/shouldnt bore it out yourself but otherwise its all possible. The world/top-end-of-your-bike is your oyster.
 
Hahaha! I'm not doing the engine myself at all. That is still beyond my skills. All will be done professionally (well, professional freind who still works from his backyard). But I'm pretty much trying everything else.
If I pull this project off and have a rider then I have a '72 CB250 that I might try pulling apart myself as a long term project.
 
Re: 'nother noob, 'nother CB350.

IMG_4297.jpg


Pitting in the cam and rocker where they sat together for a number of years.

IMG_4299.jpg


Barely a ring to be seen on that left side and they tensioner... fubar

IMG_4305.jpg


All this plus a broken plug just for a final kick. Also scoring in the cylinders so a +1 o/s bore is in order.

Shopping list... Cam, rockers, valves, tensioner, .25 O/S pistons and rings, gaskets and I was thinking of putting one of those allen head bolt kits on. Any opinions on them? Anything I might be missing?

The bottom end however is a dream. No play, tight as, like it came of the production line (May be that last one is getting a bit carried away, but it's good).
So it's good and bad and pretty much what I expected
 
Building it from the engine up you'll definitely know the shape your bike is in regarding ALL it's components. Just saw a bobber style militaryesque bike at the biker build off here at bikefest in Las Vegas and he had shiny darker metallic paint on the normal parts that get painted and a lighter matte green on many other parts of he bike and it looked really great. By describing it it sounds fugly, but it looked really good in person. I think a CL/high exhaust would look good if you're going for that kind of look.
 
I'm thinking a dark metallic grey for the frame but not sure about the engine painted/metal at the moment. Maybe shorties for the exhaust but as soon as I read CL, I pictured it. Looked good and nothing is locked in stone.
 
Looking at some full bore pistons and rings on ebay. By my calculations, this would take the engine from around 325cc to about 362cc. What would this mean in terms of carbs/tuning?
 
So here's the story....
Got 'em. $90 bucks and it's deal. About 2/3 the price of anything else I had come across so far. Still looking for a cam and rockers, valves, need to buy a gasket set and that bolt kit. Then I think the engine should be a happening thing. Money can then be put to other uses and this thing can start coming together.
Looking ahead... where is the best place to find spokes? I have a local guy who can do that for me pretty cheap if i get the spokes. I keep hearing about some from Thailand, anyone got a link?
Still not sure about that tank... anyone got an answer on origin? It will need a petcock so I guess I need to know to find one.
Think thats it for now....
 
Accidentally got a bit done today. After dropping the missus at work, went to check out Kmart for a cheap skateboard deck as I've decided not to use the fabbed seat pan the PO made up. Got one of those camping mats while I was at it to make some padding, saw a Bunnings store so stopped and got a cheap angle grinder. When I got home, Matt from across the road (Triumph rider :) ) told me about some upholsterers he had used for his car. Ducked around to see them, very helpful guys :) . While I was out on that trip, decided to pick up some degreaser and paint stripper for the frame and tank respectively. Got home again and threw some stripper on the tank(can't remember her name) and started cleaning up the frame. Got done with that so decided to throw some stripper on the frame. Got to work on the tank, came back to the frame and when I hit it with a wire wheel on the drill it just all came away. By then I had to go get the wife again, so while I was on THAT trip, thought I'd pick up some rattlecan and hit up the frame.
So... end of day and I have a chopped and painted frame and a stripped tank. AND all the info I need to get this seat happening, a quote from the guys and an offer to use their gear to shape it up if I need.
It got too dark to take photos (I have no shed and was cleaning up the gear in the dark by the time I was done) and I have work tomorrow. Will take some pics on Sunday and get them up. Pretty chuffed by the progress today!!! ;D
 
another backyard builder. i feel your pain. i have a little 8x8 shed that all sorts of other stuff in it so there's no room to work. my shop is outside under the trees. it's great when the weather is nice. but on those other days....
 
Hehe! I have an unused outside loo (toilet still intact) as storage. I have a wooden foldable table I found on the side of the road as a workbench and a back deck for bigger stuff. Livin' the dream... livin' the dream :P
 
Re: 'nother noob, 'nother CB350 (and maybe a GS1100)

Pluses and minuses.. welcome to the real world. Lets start with the minuses. Seems I may have rushed the painting of the frame and it's peeling off. Sucks to be me but that the sort of thing I do sometimes when I get a head of steam up.
On the plus side, I met a guy who will blast the entire frame for me and give it a coat of primer... all for a case of beer (he works in the industry, mainly doing HUGE projects like coal loaders and shit). AND mny mum just gave me the number of a guy selling a GS1100 for $200. It ran fine 2 years ago but has had nix done to it since. Sat outside with a tarp over. What do you think? Anyone had any thing to do with these? It would screw with my nick....but it could be a lot of fun
 
i got the allen key bolt set, it all labeled RH Crank, LH Crank, etc you also have to use loctite on all the bolts but it's all pretty straightforward. but if you ever needed to go in you can do it with like 2 allen keys which is great. the only problem is that the bolts are so shiny which sucks because it makes the actual engine covers look crappy.
 
Re: 'nother noob, Project 362

So it has a name... 362 for the capacity (if i have calculated correctly) that it will become when it gets the big bore kit (it sounds silly calling it 'Big Bore' when it will only end up as 362cc... but there you go)
 
Back
Top Bottom