"OEM Type" Blue Threadlocker/Loctite

snoekers

New Member
Hey Guys,


You know when you buy a bolt and it already has blue thread locker on it? Well, I can't seem to get the same thread locker. The blue Loctite I picked up neither dries on the bolt nor looks halfway decent. What do brand/type of thread locker comes on bolts? I need it for an OEM product, so finished look is important. Someone here has to know! Thanks!
 
hmmm

if you want a bolt to just have the "look" i would assume maybe a thin coat of BLUE RTV might "look" closer
 
I dug up the packaging for what I used... I tried Permatex medium strength threadlocker. The main problem I had that it did not seem to dry even after a day or so. It was also very watery. Strange post, eh? Is RTV thicker than normal by any chance?
 
Not sure what the problem here is. dielectric is right. your applying it then put it together. it will settle and cure over time.
 
Sometimes Locktite separates a little bit in the container and you get a "watery" bit before the real thing comes up. I use the ones that come in a tube, like lipstick, with a small applicator end. They work well.


I'm not at all sure I understand what you meant by the look of the stuff or why you would care what it look like; its purpose is to insure the bolt stays where put. It doesn't take much of it either, so usually you don't see where you've used it at all. Use blue Locktite on all bolts unless you are using red Locktite on them. Only use red on bolts that you can use heat on to take them out - should it ever become necessary.
 
Back
Top Bottom