freemich-be
New Member
Hello Guys,
I'm new to the forum and have recently purchased a 1975 cb125 with a 200cc engine.
A few things I did:
- Changed the clutch plates
- Put in new 10w40 oil.
The bike runs well but immediately after riding it starts to leak behind the countershaft.
Check this out:
http://www.youtube.com/watch?v=YSmqhrGs974&feature=youtu.be
It's strange becauce before we changed the oil and clutch plates there was no leak at all.
The oil level seems to be ok, so I think that's not the problem.
Any advice from someone whos had seen this before?
I'm new to the forum and have recently purchased a 1975 cb125 with a 200cc engine.
A few things I did:
- Changed the clutch plates
- Put in new 10w40 oil.
The bike runs well but immediately after riding it starts to leak behind the countershaft.
Check this out:
http://www.youtube.com/watch?v=YSmqhrGs974&feature=youtu.be
It's strange becauce before we changed the oil and clutch plates there was no leak at all.
The oil level seems to be ok, so I think that's not the problem.
Any advice from someone whos had seen this before?