Paint..vinyl graphics?

kzcafe82

New Member
I am at the point in time where I have to decide how my bike (82 kz550) is going to look. I have a professional painter that is willing to paint my bike for free...my uncle. Because he is doing it for free, I do not expect him to go over board with the paint so I am not going to ask him to go two or three tones. I plan to just get everything painted all the same color and then apply some minor design with vinyl graphics. The guy I plan to have do the vinyls seems to be very good and he is local. I have seen his work and it is impressive. I just hope it will look just as good on a bike as other vehicles. I am going to put a link to his website and I want to know what everyone thinks of my idea. The picture below is what I have in mind for graphics. Also any ideas as to if I should put anything on the sides of the tank would be appreciated as well. I really like the way I have seen stainless steel tank sides but I not sure as to how I would go about buying/making and applying them.
Graphic Designer's website link: http://www.cousinsdesigns.net/
 

Attachments

  • gold 2.png
    gold 2.png
    58.8 KB · Views: 260
Do you think the vinyls will look nice under the clear? I am thinking it will. Actually come to think of it, my uncle told me when he was sanding down the tank that that is how the the original orange stripe was. It was a decal under the clear.
 
kzcafe82 said:
Do you think the vinyls will look nice under the clear? I am thinking it will. Actually come to think of it, my uncle told me when he was sanding down the tank that that is how the the original orange stripe was. It was a decal under the clear.


I think so. I think they will be well protected too. It would be a shame to spend the money on the decals and then brush against the bike and accidentally tear one or something. Plus, I bet your uncle knows exactly how to clear over the decals.
 
Yes I would assume so. I am sure he has done it on multiple cars in his days of painting. Haha. Now I have to figure out what color to go with. I dont plan on painting my frame. I am going to leave it black so I need something that will go nicely with the black frame. I have a few options to choose from. Black, Navy Blue, Dark Red, Light Blue pearl coat. I think I like the black with goldish vinyls. Opinions?
 
I do like your initial color scheme. Maybe you could tie it in with a couple pin stripes on the bottom sides of the tank and tail?
 
They definitely [ graffix ] need to be under a clear coat. Apart from potential damage they will look less like stick-ons !

Just make certain there is absolutely no air or bubbles under the graffix before you start.

Here is my old 27T Altered - Apart from the flames - which I hand drew and masked up [ 4 hours ! ] everything you see is a stick-on. In my case the only bummer was that I changed one of the parts sponsors after !!!!!!!!!!!!!!!!!!! ::)

cars070.jpg
 
Back
Top Bottom