"Patina" The 1973 CB175 Cafe Racer

We can tell you that the filters will cost you hp on the Dyno and so will longer velocity stacks and we understand why they need to be longer because the frame is in the way. The steel dragons are sexy. They need fish net hose not filters ;) and maybe a garter


Sent from my iPhone using Tapatalk
 
Texasstar said:
We can tell you that the filters will cost you hp on the Dyno and so will longer velocity stacks and we understand why they need to be longer because the frame is in the way. The steel dragons are sexy. They need fish net hose not filters ;) and maybe a garter


Sent from my iPhone using Tapatalk

I'm still worried that they won't fit. I took tons of measurements but I didn't realize how big the flare was going to kick out. I may be in danger of hitting the seat rails along the underside because they are long. Worst case, I'll get the flare turned down a bit to knock the widened off.

Also, do you know the theory behind why longer ones will hurt? I've noticed yours are super short! Also, do you have a screen at the throat of some sort?


Sent from my iPhone using Tapatalk
 
it is not theory about the lost hp, the long straight section has frictional losses
the screen is to small in surface area to not create losses
send those things back they are a huge waste of money
put on some proper large filters on the carbs ;) concentrate the looks stuff on things that dont kill performance or you're freshly bored cylinders
 
xb33bsa said:
it is not theory about the lost hp, the long straight section has frictional losses
the screen is to small in surface area to not create losses
send those things back they are a huge waste of money
put on some proper large filters on the carbs ;) concentrate the looks stuff on things that dont kill performance or you're freshly bored cylinders
a Dremel and a 4 buck carbide bit on your exhaust port will do amazing things...


Sent from my iPhone using Tapatalk
 
This is the first place we will start on Zeke's 175 http://youtu.be/6vJQZvMsY1w


Sent from my iPhone using Tapatalk
 
Geeze. I wish I had the cojones. Way cool. Is all porting done by hand usually? Forgive my ignorance.


Sent from my iPhone using Tapatalk
 
1sttimer said:
On another note...these sweet puppies came in from Steel Dragon Performance...

6e2u4ata.jpg



Sent from my iPhone using Tapatalk

Pull those screens out.
 
Do have screens in your carbs? Our cl175 and cl160 had screens on the ends of the carbs


Sent from my iPhone using Tapatalk
 
I use screens on my stacks, but they're on the outside of the bellmouth and not inside right before the carbs.
 
So just so I get this right (I still may not be understanding), run wide open with nothing protecting large particles from the throat?

XB mentioned filters on the stacks which would be interesting. I've never heard of that but I imagine that would look strange...could work?

I guess my confusion is around restriction. Certainly a pod filter or any filter at all would provide more restriction than just a screen door type material, right?


Sent from my iPhone using Tapatalk
 
You want something like this:

viewThumb.jsp


It fits on the outside of the stacks and keeps twigs, rocks, and small children out of the intake. Because they're on the outside, they cause much less restriction and turbulence than internal screens. Also, screens do little-to-nothing for dust, so count on re-ringing every 5,000 miles and valve jobs every 15,000.
 
My understanding is that the screen in your current stacks interrupt the flow in the bell, negating performance. So, if you want to run a screen it has to be on the outside of the bell, like Sonreir said. I've heard of people running foam filters over top of the entire stack. That way the flow is still there, along with the filtering, but it doesn't look ridiculous.

Edit: Sonreir beat me to it.
 
Sonreir said:
You want something like this:

viewThumb.jsp


It fits on the outside of the stacks and keeps twigs, rocks, and small children out of the intake. Because they're on the outside, they cause much less restriction and turbulence than internal screens. Also, screens do little-to-nothing for dust, so count on re-ringing every 5,000 miles and valve jobs every 15,000.

Cool. I really really don't want to open up a can of worms with this question. If you want to point me to a thread instead, I'm ok with that....but...

I imagine pods with a rubber boot on the carb would be preferred to a stack if we were STRICTLY talking about keeping engine internals clean? - this assuming a quality filter of course.


Sent from my iPhone using Tapatalk
 
BarnBurner said:
My understanding is that the screen in your current stacks interrupt the flow in the bell, negating performance. So, if you want to run a screen it has to be on the outside of the bell, like Sonreir said. I've heard of people running foam filters over top of the entire stack. That way the flow is still there, along with the filtering, but it doesn't look ridiculous.

Edit: Sonreir beat me to it.
we run a foam filter over the stacks :) but we take the stockings off at home to look at them


Sent from my iPhone using Tapatalk
 
1sttimer said:
Cool. I really really don't want to open up a can of worms with this question. If you want to point me to a thread instead, I'm ok with that....but...

I imagine pods with a rubber boot on the carb would be preferred to a stack if we were STRICTLY talking about keeping engine internals clean? - this assuming a quality filter of course.


Sent from my iPhone using Tapatalk

Yup. Filters (of almost any type) will keep things cleaner than stacks.
 
Sonreir said:
Yup. Filters (of almost any type) will keep things cleaner than stacks.
David Vizard sold me on K & N Filters running them on the 4 wheel honda


Sent from my iPhone using Tapatalk
 
Has anyone ever put a piece of cylindrical foam down the stack as filtration?


Sent from my iPhone using Tapatalk
 
K&N has a lot of good options for different filters and you can even check their website for different sizes, shapes and such to ensure you'll get what you want.

Right now I'm running a K&N pancake on my mikuni.
 
Back
Top Bottom