Texasstar said:I have the data somewhere and it is significant...cheap insurance for the top of the engine
Sent from my iPhone using Tapatalk
1sttimer said:I'm waiting for funds to purchase a ricks rebuilt stator to make sure this thing charges.
Anyone know if it is possible to easily test a rotor while I'm at that too?
xb33bsa said:yep put one wire in yer ear one near yer mouth and call home ;D
we use hylomar and the gasket and like deviant we use it to hold the gasket in place1sttimer said:Could I use loctite 518 in place of my engine side cover gaskets or is that a place where a gasket is necessary? Makes cleanup so much easier the next time I need to take the cover off.
Maritime said:You can also use a little anit-seize on the gasket to make it not stick but still seal, makes the gaskets re-usable when you are in the trying to sort the engine out phase. I used it on my 450 and on my GL and have had no issues with leaks and been able to remove the covers a few times without wrecking the gaskets.
Maritime said:I used it on both sides and carefully put the gasket on, but you could just do the case side and allow it to stick. Secret is just a small amount evenly applied. too much and you will get seeps.