So after driving one of my bikes for a while i noticed a fine mist of oil gathering dust on my engine
and on cool day condensation causing goop to form in my side cover
so here is what i did to fix
the breather hose issue once and for all i am going to contact the filter manufacturer and see if they can do this in production
the elbow i used is by dayco for some car emission thing it is part number 28623 comes in ones or a pack of 5
pardon my lousy pictures but you will get the idea
make the hole smaller than the fitting so it seals and holds the elbow
no more mist or loose hose and condensation problems
and on cool day condensation causing goop to form in my side cover
so here is what i did to fix
the breather hose issue once and for all i am going to contact the filter manufacturer and see if they can do this in production
the elbow i used is by dayco for some car emission thing it is part number 28623 comes in ones or a pack of 5
pardon my lousy pictures but you will get the idea
make the hole smaller than the fitting so it seals and holds the elbow
no more mist or loose hose and condensation problems
