Post a pic of your latest purchase

Beard said:
got my jacket back from the tailor, now it needs to get dirty
jacketfr.JPG

jacketbk.JPG

I have the exact same jacket.. I paid less than $100 for mine...
 
Just got these in tonight, shiny SS brake lines with the clear PVC coating, still waiting on the master cylinder, but I'm ordering it tonight so it should be here next week.

SSBrakelines.jpg
 
Gauges & headlight ears from Dime City~

summer2011bfcmeetngreet017.jpg


summer2011bfcmeetngreet020.jpg


summer2011bfcmeetngreet019.jpg


I also installed my new tsubaki o-ring chain today but didn't take a pic. I have some problems with the gauges so look for my post in 1-800-cafe-help.;)
 
A buddy of mine has an '89 KLR650 that ate its speedometer drive off the front hub. He checked around and found a used front wheel for $100. The "catch" was, it came attached to a very neglected/non running '87 KLR650.
He asked me to give him a hand swapping the wheels around, and of course, I said "sure".
When it was all said and done... he gave me the '87 for the help!

Photo206.jpg

Photo208.jpg


I did a quick inventory of what she'll need. And aside from numerous nuts and bolts, some rubber grommets, a new cable or two, fresh fluids, and a thorough cleaning... she needs a fresh battery and those freakin' plastic fuel/vent elbows. After that she'll be just fine ;)

BTW, I had her running about 20 minutes after getting her home. After a jump start and some fresh gas squirted in the carb... she fired right up :D
 
Almost forgot about these, for the DS7...

SU1HMDAwNjEtMjAxMDExMDYtMDczMy5qcGc.jpg


Thanks Hurricane!
and in a round about way... thanks Big Rich also.
 
Ha! I saw the stool with the gloves and though "Is Red in my garage right now?"

If so, let the dog out and don't drink my last beer!

:D
 
those KLR's are fuckin bulletproof... would make an awesome dual sport touring bike when built up right...
 
Thanks :)
I'm thinking of doing a Motard style conversion to it and then give it to my older son to ride.
 
Speaking of for NIX..mate of mine who knew I have a few projects on the go suggested I call some fella around the corner from my place as he wants to sell his 1981 gs650g suzy...I drop round take a look, carby's need an o'haul & 2nd gear dodgey good tyres "like new" & never dropped & includes a workshop manual.He said just take the bloody thing... I said I couldn't do that so $ = 1 bottle of MOE'T nice!!!! buggered when I will get time to fix it .....but it was too good to pass up :D
 

Attachments

  • smoothkat 1.jpg
    smoothkat 1.jpg
    86.3 KB · Views: 358
  • smoothkat 2.jpg
    smoothkat 2.jpg
    70.4 KB · Views: 314
  • smoothkat 3.jpg
    smoothkat 3.jpg
    84.6 KB · Views: 377
chimp1 said:
Speaking of for NIX..mate of mine who knew I have a few projects on the go suggested I call some fella around the corner from my place as he wants to sell his 1981 gs650g suzy...I drop round take a look, carby's need an o'haul & 2nd gear dodgey good tyres "like new" & never dropped & includes a workshop manual.He said just take the bloody thing... I said I couldn't do that so $ = 1 bottle of MOE'T nice!!!! buggered when I will get time to fix it .....but it was too good to pass up :D

Ship it to me, I'll fix er up and ride the crap out of it ;D
 
sinjinle said:
DSCN0887.jpg

got this whole front end for $75. its from a 89 ninja 600....will this work on a cb360?

Not without some modification, although ALLBALLZ are now doing a pic-n-mix on bearings so that may be the easy bit.
I got a set of 95 Ninja (250?) 36mm forks to go on one of mine, need re-building but tubes ain't rusty so not a problem.
I'm going to switch out stem and make a new top yoke, when I get reound to it ::)
 
Back
Top Bottom